Legrand Cantilever Arm Bracket Hot Dip Galvanised Steel Cable Tray Fixing Plate, 50 mm Width, 65mm Depth

  • RS Stock No. 163-3071
  • Mfr. Part No. LCA50G
  • Brand Legrand
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with a bottom flange on arms 225 mm wide and above for extra strength Supplied singly without fasteners

Specifications
Attribute Value
Accessory Type Cantilever Arm Bracket
Material Hot Dip Galvanised Steel
Depth 65mm
Series LCA
Tray and Basket Type Cable Tray
Width 50 mm
For Use With Flat Surface Tray, Swiftrack Channel
Duty Type Heavy Duty, Light Duty, Medium Duty
17 In stock for FREE next working day delivery
Price Each
£ 4.63
(exc. VAT)
£ 5.56
(inc. VAT)
Units
Per unit
1 - 9
£4.63
10 +
£4.17
Related Products
Basic plated steel discs, designed to complement the ...
Description:
Basic plated steel discs, designed to complement the RS Energise to Release and Energise to Hold magnets. 739-3264 = 25mm Dia739-3211 = 30mm Dia739-3255 = 40mm Dia739-3251 = 50mm Dia739-3217 = 65mm Dia739-3214 = 80mm Dia.
PVC cantilever support arms for PVC condiut. Easy ...
Description:
PVC cantilever support arms for PVC condiut. Easy to install Eco-friendly: PVC is 100% recyclable Can be installed inside and outside Suitable for use in chemical or petrochemical industries, paper or food processing Suitable for use in commercial environments like storage areas, car parks offices and service ducts RoHS compliant. ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for–600-900“€€mm widths but only type ‰ applies to narrower trapeze hangers. The recommended safe working load for each width and method of fi†ing is given in the ...
Pre-galvanised medium duty couplers Couplers are required for ...
Description:
Pre-galvanised medium duty couplers Couplers are required for joining together MRF straight lengths or cut lengths of tray without the need for further drilling MRFC standard couplers are supplied in pairs MRFC standard coupler is supplied singly.