Power Integrations, LNK304PNStep-Down Switching Regulator, 1-Channel 170mA 7-Pin, DIPB

Subtotal (1 unit of 50 units)*

£0.85

(exc. VAT)

£1.02

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 21 unit(s) ready to ship
  • Plus 9,279 unit(s) shipping from 27 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per unit*
1 +£0.85£0.017

*price indicative

RS Stock No.:
146-8552
Mfr. Part No.:
LNK304PN
Brand:
Power Integrations
Find similar products by selecting one or more attributes.
Select all

Brand

Power Integrations

Maximum Output Current

170mA

Maximum Output Voltage

700 V

Regulator Function

Boost, Buck, Flyback

Minimum Output Voltage

-0.3 V

Minimum Input Voltage

85 V ac

Maximum Input Voltage

265 V ac

Output Type

Fixed

Mounting Type

Through Hole

Number of Outputs

1

Maximum Switching Frequency

70 kHz

Pin Count

7

Package Type

DIPB

Minimum Operating Temperature

-40 °C

Dimensions

9.83 x 6.6 x 3.68mm

Maximum Operating Temperature

+150 °C

Length

9.83mm

Height

3.68mm

Width

3.68mm

LNK304 LinkSwitch-TN Buck Converter


The Power Integrations LNK304 LinkSwitch™-TN device family are Buck Converter ICs that provide a low component count step down solution. The LNK304 has been designed to offer a higher performing alternative when compared to linear and passive component solutions.

Applications


The LNK304 LinkSwitch buck convertor is ideal for use in appliances and timers, and for LED drivers and industrial controls.

Features


Fully integrated auto-restart for short circuit and open loop fault protection
66 kHz operation with accurate current limit
Tight tolerances and negligible temperature variation
High breakdown voltage of 700 V
Frequency jittering dramatically reduces EMI (∼10 dB)
Built-in current limit and hysteretic thermal protection
High thermal shutdown temperature (+135 °C minimum)
Consumes typically only 50/80 mW in self-powered buck topology at 115/230 V ac input with no-load (opto feedback)
Consumes typically only 7/12 mW in flyback topology with external bias at 115/230 V ac input with no-load

LinkSwitch-TN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency. LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high-voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC.

Tight tolerances and negligible temperature variation
System level thermal overload, output short-circuit and open loop protection
Supports buck, buck-boost and flyback topologies
Excellent line and load regulation even with typical configuration
High bandwidth provides fast turn-on with no overshoot
Current limit operation rejects line ripple
Built-in current limit and hysteretic thermal protection


Switching Voltage Regulators, Power Integrations