2 Hole Flange Bearing Unit, GLCTE35-XL, 35mm ID
- RS Stock No.:
- 194-6879
- Mfr. Part No.:
- GLCTE35-XL
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
£55.88
(exc. VAT)
£67.06
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- Plus 1 unit(s) shipping from 27 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 4 | £55.88 |
| 5 - 9 | £52.59 |
| 10 - 24 | £51.52 |
| 25 + | £50.41 |
*price indicative
- RS Stock No.:
- 194-6879
- Mfr. Part No.:
- GLCTE35-XL
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Inside Diameter | 35mm | |
| Bearing Unit Type | Flange Bearing Unit | |
| Number of Mount Holes | 2 | |
| Material | Cast Iron | |
| Length | 94mm | |
| Width | 42mm | |
| Depth | 126mm | |
| Mount Hole Size | 11.5mm | |
| Mount Hole Centre-to-Centre | 100mm | |
Select all | ||
|---|---|---|
Brand INA | ||
Inside Diameter 35mm | ||
Bearing Unit Type Flange Bearing Unit | ||
Number of Mount Holes 2 | ||
Material Cast Iron | ||
Length 94mm | ||
Width 42mm | ||
Depth 126mm | ||
Mount Hole Size 11.5mm | ||
Mount Hole Centre-to-Centre 100mm | ||
INA housing units are available as plummer block, flanged and take-up housing units in numerous different designs. The units are ready-to-fit and comprise INA cast iron or sheet steel housings in which INA radial insert ball bearings are fitted. In order to ensure function and reliability under all operating conditions, the bearings and housings are matched to each other
Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft, see link
The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds
The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.
Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft, see link
The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds
The housings are screw mounted on the adjacent construction. Less stringent tolerances are sufficient for the screw mounting surfaces.