Double Lip Seal TSN 518 L, 80mm ID

  • RS Stock No. 506-652
  • Mfr. Part No. TSN 518 L
  • Brand SKF
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): SE
Product Details

Double-Lip Seal, Type L

Double-lip L seals are made of thermoplastic elastomer (TPE) and can be used for peripheral speeds of up to 13 m/s (2600 ft/min). In all other aspects, they are the same as the G seal. However they are only available for metric shafts in housing sizes 507-522, as of March 2007. The double-lip L seals are identified by the designation prefix TSN, followed by the size identification and the suffix L, for example, TSN 511 L.

Plummer Blocks, Bearing Lubrication and Accessories

Specifications
Attribute Value
Inside Diameter 80mm
Material PUR
Centre Height 100mm
Mount Hole Size 20 mm
Length 345mm
Depth 140mm
Overall Height 194mm
Mount Hole Centre-to-Centre 290mm
For Use With Type L for Plummer Block Housed Units
2 in stock for FREE next working day delivery
4 available from Europe for delivery within 1 working day(s).
Price Each
£ 18.80
(exc. VAT)
£ 22.56
(inc. VAT)
Units
Per unit
1 - 4
£18.80
5 - 9
£18.05
10 - 24
£17.68
25 +
£17.29
Related Products
The bearing seating in the housing is sufficiently ...
Description:
The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axially Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore by locating rings at both sides The locating rings ...
Easy to install pedestal bearings compensate for alignment ...
Description:
Easy to install pedestal bearings compensate for alignment errors and avoid edge pressures. The housings are manufactured from an impact resistant, rigid, thermoplastic composite material. High sliding speeds of up to 1.5m/s for rotary movements and 8m/s for linear movements can be supported.
For use with self-lube sealed bearing units or ...
Description:
For use with self-lube sealed bearing units or with user's own housings. Bearings are secured onto the shaft with a set-screw lock. When the axial load exceeds the limiting value, a shoulder should be provided on the shaft for the bearing inner ring to abut against so that the axial ...
Cast iron self lubricated pillow block bearings from ...
Description:
Cast iron self lubricated pillow block bearings from NSK. These pillow block bearings are easy to fit and long lasting. Designed to accommodate an initial housing misalignment of up to 0.030 radians. Made from cast iron to BS1452Spherical bearing insert accommodates initial misalignment Nitrile/fabric seals Supplied with full fitting instructionsC3 ...