This strobing beacon from Moflash is suitable for applications that call for an attention-grabbing signal. It uses a capacitor and converter circuit to ignite xenon gas inside a tube, resulting in brilliant light. The beacon is a single-stage alarm type and it's controlled by a printed circuit board (PCB) for instantaneous flash signalling. A sturdy acrylonitrile butadiene styrene (ABS) base can withstand impact and corrosion, making it suitable for use in harsh conditions. Install it in an area using existing electrical lighting points, eliminating the need for extra wiring.

• Cable termination inside an enclosure in the device to prevent wires from coming loose
• 2.0J xenon signal for superior brightness
• Broad temperature range of -25°C and +55°C for use in demanding environments
• Compact base diameter of 65mm to fit into tight spaces
• An ingress protection rating of IP65 indicates it can withstand dust and high-pressure water jets

• Material handling
• Motion sensor controlled security devices

Connect the positive lead to the '+' terminal of the beacon and the negative lead to the '-' terminal. Termination is polarity sensitive so it's important to double-check the terminals before linking them.