The IPC12 charger from Ansmann is an intelligent and versatile solution which comes pre-configured for a wide-range of applications. From offices, labs and workshops to home use, this charger is ideal for most common needs!
The IPC12 comes with 4 mains plugs to service EU, UK, US and Australian mains systems, and with its wide-range input voltage this charger can be used almost anywhere worldwide out of the box. The 8 output plugs can be attached to the output cable in either polarity to suit a greater number of products from a single unit. The handy dual-colour LED offers clear and easy to understand indication of how the charger is operating.
This version of IPC12 is configured to charge 2S Li-Ion battery packs with a nominal voltage of 7.2-7.4V at a nominal 1.45A.

Pre-Configured Charger for 2S Li-Ion Battery Packs
Suitable for Nominal 7.2-7.4V battery packs with charge end voltage of 8.4V
Nominal Charging Current: 1.45A
Wide-range input voltage for worldwide use
Push-on output connectors with reversible polarity - 8 options included
Mains plugs for EU, UK, US, AUS sockets included
Clear single dual-colour LED indication
Dimensions: 79.5x54.5x32.5mm (not including plug)
Output Lead Length: 0.9m

The Ansmann IPC 12 Uni charger for LI 10N 2 cell has maximum loadable capacity is up to 17.4 Ah with input voltage is from 100 to 240 VAC at 50 to 60 Hz frequency range. This battery charger supports leakage current which is less than 250 micro Amp. This battery also has duo LED indicator.

It can take air pressure while operation up to 795 to 1060 hPa
Stand by power consumption is less than 0.5W
It has primary electrical protection fuse with 3.15 A
Number of cells it can charge is equal to 2

Includes charger, 4 mains plugs & 8 reversible output connectors