Texas Instruments BQ2057CTSTR, Lithium-Ion, Lithium-Polymer, Battery Charge Controller 8-Pin, TSSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Lithium-Ion Battery Charging ICs, Texas Instruments

Integrated battery charging ICs from Texas Instruments intended for use with Lithium-Ion & Lithium-Polymer cells. These devices provide a complete charging and monitoring solution and include internal power devices capable of supplying charging currents of up to several amps.

Battery Management, Texas Instruments

Specifications
Attribute Value
Battery Type Lithium-Ion, Lithium-Polymer
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 8
Typical Operating Supply Voltage 4.5 → 15 V
Dimensions 3 x 4.4 x 1.15mm
Length 3mm
Height 1.15mm
Maximum Operating Temperature +70 °C
Width 4.4mm
Minimum Operating Temperature -20 °C
Price Each (On a Reel of 2000)
£ 0.687
(exc. VAT)
£ 0.824
(inc. VAT)
Units
Per unit
Per Reel*
2000 - 4000
£0.687
£1,374.00
6000 +
£0.67
£1,340.00
*price indicative
Due to temporarily constrained supply, RS is unable to accept backorders at this time
Related Products
Integrated Ideal Diode controllers offer significant advantages over ...
Description:
Integrated Ideal Diode controllers offer significant advantages over the use of discrete diodes in applications where forward voltage losses must be minimized such as diode-ORing of low voltage DC supplies. Some of these devices from Linear Technology include on-chip MOSFETs which take the place of conventional diodes with significantly reduced ...
The STEVAL-ISB044V1 evaluation kit has been designed for ...
Description:
The STEVAL-ISB044V1 evaluation kit has been designed for devices, such as smartphones or tablets, requiring high power levels. It supports wireless battery charging up to 15 W. The embedded STWBC-EP digital controller transmitter is based on a cost-effective half-bridge topology providing external interfaces via UART and I²C. The kit also ...
The STWBC-EP is the digital controller for the ...
Description:
The STWBC-EP is the digital controller for the wireless battery charger (WBC) transmitters (TX) from STMicroelectronics optimized for Extended Power Profile (EPP) Wireless Power Consortium (WPC) 1.2 certified applications up to 15 W. It offers the most flexible and efficient solution for controlling the power transfer to a receiver (RX) ...
The STC3115 includes the hardware functions required to ...
Description:
The STC3115 includes the hardware functions required to implement a low-cost gas gauge for battery monitoring. The STC3115 uses current sensing, Coulomb counting and accurate measurements of the battery voltage to estimate the state-of-charge (SOC) of the battery. An internal temperature sensor simplifies implementation of temperature compensation. An alarm output ...