Loctite Loctite 770 Liquid Bottle Adhesive Primer for use with Cyanoacrylate Adhesive, 10 g
- RS Stock No.:
- 108-722
- Mfr. Part No.:
- 146624
- Brand:
- Loctite
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 108-722
- Mfr. Part No.:
- 146624
- Brand:
- Loctite
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Loctite | |
| Trade Name | Loctite 770 | |
| Type | Primer | |
| For Use With | Cyanoacrylate Adhesive | |
| Product Form | Liquid | |
| Package Type | Bottle | |
| Package Size | 10 g | |
Select all | ||
|---|---|---|
Brand Loctite | ||
Trade Name Loctite 770 | ||
Type Primer | ||
For Use With Cyanoacrylate Adhesive | ||
Product Form Liquid | ||
Package Type Bottle | ||
Package Size 10 g | ||
- COO (Country of Origin):
- IE
Loctite® 770 Polyolefin Primer
Enhances adhesion of cyanoacrylates to materials normally very difficult to bond successfully
Promotes bonding of polypropylene, polyethylene, thermoplastic, rubber and silicone
Fluoresent additive allows checking of application with a UV lamp
Bonds PTFE etc to itself or other substrates
Promotes bonding of polypropylene, polyethylene, thermoplastic, rubber and silicone
Fluoresent additive allows checking of application with a UV lamp
Bonds PTFE etc to itself or other substrates
Loctite Adhesive Primer
The Loctite 770 liquid adhesive primer is a 10g, low viscosity for used with cyanoacrylate adhesive. It is only recommended for difficult to bond substrates which include polyethene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. This polyolefin primer is not recommended in assemblies where high peel strength is required. This liquid behaves as an activator and accelerates the cure speed of cyanoacrylate adhesives. Fixturing time on most primed substrates is less than 5 seconds but 24 hours at room temperature (22 °C) should be allowed for adhesive to develop maximum bond strength.
Features and Benefits
• Chemical type aliphatic amine
• Solvent n-heptane
• Fluorescent additive allows checking of application with a UV lamp
• Specific gravity of 0.68
• Solvent n-heptane
• Fluorescent additive allows checking of application with a UV lamp
• Specific gravity of 0.68
Certifications
• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007
• BS EN 61340-5-1:2007