Security Alarm Accessories

Filters

Viewing 1 - 5 of 5 products
Results per page
Description Price Accessory Type For Use With Quantity Included
New
RS Stock No. 192-4565
BrandRS PRO
£56.56
Each
Units
Power Supply - -
New
RS Stock No. 192-4564
BrandRS PRO
£157.81
Each
Units
Power Supply - -
RS Stock No. 407-0592
Mfr. Part No.S1600-R
BrandHoyles
£17.70
Each
Units
Ceiling Pull Cord Alarm 1
RS Stock No. 524-5028
Mfr. Part No.VT4000W
BrandABUS
£6.06
Each
Units
Terminal Distributor Terxon Wired & Hybrid Alarm Systems 1
RS Stock No. 524-5006
Mfr. Part No.VT4100W
BrandABUS
£7.92
Each
Units
Terminal Distributor Terxon Wired & Hybrid Alarm Systems 1
Related Products
24 volt 1A dc general use switched mode ...
Description:
24 volt 1A dc general use switched mode power supply. The unit is capable charging Lead Acid batteries (NOT supplied). Housed in a steel case, intended for internal use only. All units have protection from AC input surges and transients, under and over AC power, over-heating and over-current, battery-reverse connection ...
Designed for use with machine mechanisms or as ...
Description:
Designed for use with machine mechanisms or as door magnets, our high quality RS PRO range presents this small yet powerful magnetic lock. Able to remotely lock or un-lock with quick operation, these electro-permanent magnets are energised to hold and de-energised to release. Optimum performance when used with RS armature ...
Operating voltage: 12 or 24Vdc Brushed aluminium Current ...
Description:
Operating voltage: 12 or 24Vdc Brushed aluminium Current draw: 500mA at 12Vdc x 2 (at 20°C)Magnetic bond sensor monitor output remotely monitors the door lock or unlock status.Operating temperature: -10 to 55°C (14 to 131°F)Humidity: 0 to 95% non-condensing Lock’s surface temperature: ambient temperature ±20% (when power is on)Holding force: ...
A wall mounted CALL button in white ABS ...
Description:
A wall mounted CALL button in white ABS complete with a single gang mounting box. This is a non-latching unit with a N/O contacts. The buzzer has separate terminals for acknowledge purposes. The LED current limit resistor is provided for 12Vdc operation. The button contacts are rated at 50mA 24Vdc ...