Tube Cutters

A tube cutter is a hand held tool used for cutting plastic and nitrile rubber tubing and air line hose to the required length.What does it do?Tubing or hose is inserted into the head of the cutting tool. Pressure is applied to the handles of the tool closing the head where the internal blades are held. Blades cut through the wall of the tubing slicing off the end or section.Why do you need it?Air line tubing and hose are supplied longer coils and lengths. A tube cutter enables you to cut the tube to the required length for the application in hand.TypesThere are two types of tube cutter available; Finger type: The two finger type cutter is a handy small tube cutter that could easily be attached to a keyring or popped into a pocket or overall. The tube cutter has a plastic body with small internal blades in the tip of the tool. A two finger pincer action is all that is required operate the tool. Plier type: The pliers tool is a more robust industrial type cutter. The metal handles of the tool require a full hand squeeze to clamp together the cutting head.

...
Read more Read less

Filters

Viewing 1 - 20 of 27 products
Results per page
Description Price Suitable For For Maximum Tube Outer Diameter Body Material Blade Material Weight
RS Stock No. 172-8970
BrandRS PRO
£18.09
1 Bag of 10
Bag(s)
- 15mm - Stainless Steel -
RS Stock No. 172-8969
BrandRS PRO
£5.13
1 Set
Set(s)
- 15mm Polyacetal Stainless Steel 33g
RS Stock No. 176-0977
BrandRS PRO
£7.432
Each (In a Pack of 10)
Units
Plastic - - - -
RS Stock No. 722-198
Mfr. Part No.3000 71 00
BrandLegris
£6.42
Each
Units
Plastic 14mm Nylon Stainless Steel 30.9g
RS Stock No. 667-9400
Mfr. Part No.TK-3
BrandSMC
£7.43
Each
Units
Plastic 12mm Plastic Stainless Steel 32g
RS Stock No. 366-3799
BrandLegris
£3.232
Each (In a Pack of 10)
Units
Plastic 16mm Technical Polymer Stainless Steel -
RS Stock No. 667-9390
Mfr. Part No.TK-2
BrandSMC
£23.54
Each
Units
Plastic 18mm Steel - 140g
RS Stock No. 667-9396
Mfr. Part No.TK-1
BrandSMC
£22.85
Each
Units
Plastic 13mm Plastic Stainless Steel 140g
RS Stock No. 701-3179
Mfr. Part No.TG-1
BrandSMC
£12.24
Each
Units
Plastic 6mm - - 33g
RS Stock No. 764-9731
Mfr. Part No.3000 70 00
BrandLegris
£14.37
Each
Units
- 14mm - - 200g
RS Stock No. 144-7934
Mfr. Part No.3000 71 11
BrandLegris
£24.18
Each
Units
Plastic 12 25mm Steel Steel 227g
RS Stock No. 136-7029
Mfr. Part No.ZRS
BrandFesto
£99.19
Each
Units
Plastic 20mm - - -
RS Stock No. 136-6688
Mfr. Part No.ZRS10PACK.
BrandFesto
£34.99
Each
Units
Nitrile Rubber, Plastic 20mm - - -
RS Stock No. 2508754512
Mfr. Part No.TG-2
BrandSMC
£11.99
Each
Units
- - - - -
RS Stock No. 2508754821
Mfr. Part No.TKS-06
BrandSMC
£20.57
Each
Units
- - - - -
RS Stock No. 2508754837
Mfr. Part No.TKS-08
BrandSMC
£20.57
Each
Units
- - - - -
New
RS Stock No. 2552481064
Mfr. Part No.PAN-V0S-10
BrandFesto
£14.19
Each
Units
- - - - -
New
RS Stock No. 2552481065
Mfr. Part No.PAN-V0S-12
BrandFesto
£14.78
Each
Units
- - - - -
New
RS Stock No. 2552481066
Mfr. Part No.PAN-V0S-4
BrandFesto
£9.22
Each
Units
- - - - -
New
RS Stock No. 2552484166
Mfr. Part No.QSO
BrandFesto
£3.61
Each
Units
- - - - -
Related Products
The RS PRO air hose is designed for ...
Description:
The RS PRO air hose is designed for use in welding applications, where tubing is likely to come in contact with weld spatter and sparks. It is specifically built to carry air, gases, some liquids, dry powders and granules. The inside diameter of hose is 6.5mm and outside diameter of ...
The Festo air hose is made from superior ...
Description:
The Festo air hose is made from superior quality polyurethane. It is compatible with cable carriers for applications with high cycle rate suitable for energy chains greater than 5 million cycles. It operates on compressed air. It has inner diameter of 2.1mm and outer diameter of 3mm. The pneumatic connections ...
HSS hole cutter with spiral tap For burr-free ...
Description:
HSS hole cutter with spiral tap For burr-free drilling and planing pipes, sheet metals and profiles, as well as moulding, retro drilling and expanding cut-outs Suitable for construction steel, stainless steel, non-ferrous metals, Plexiglas, plastic and wood up to 6 mm thick Crosswise grinding means no centre-punching necessary, drill bits ...
HSS Ti AlN-coated hole cutter for particularly hard ...
Description:
HSS Ti AlN-coated hole cutter for particularly hard materials; glides easily and not prone to wear For burr-free drilling and planing sheet metal, pipes and profiles Suitable for construction steel, Cr Ni steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick Crosswise grinding, no centre-punching necessary, drill ...