Compression Fittings

What are compression fittings?Suitable for use in both commercial and residential applications, brass and copper compression fittings are an easy and practical plumbing method for both DIY and professional plumbers. Available in a variety of standard sizes each in different profiles such as straight connectors, 90-degree elbow, equal tee as well as reducing fittings from one size to another. Connecting copper pipe is easy with the range of fittings available with minimal effort. How do compression fittings work?Standard compression fittings are simple and easy to use fitting as simple as the name sounds. Made up of three basic pieces, a compression fitting uses a threaded nut with a hole in that tightens down to the compression fittings body. This tightens down over a small typically brass ring called an Olive that is placed between the nut and the body of the fitting. This olive is compressed by the tightening of the nut to the body creating a sealed joint. What size do I need? Always check the exact size of the pipe or fitting to be used when plumbing and a range of metric and imperial fittings are available and ensuring the correct size is selected is key to making an exact and well-sealed joint. Using Compression FittingsMost standard compression fittings just require two spanners to install, these can either be fixed or adjustable spanners used to tighten the fittings nut down for the best seal. PTFE tape may also be used over the fittings thread to give the best seal and limit the risk of leaking over time.

...
Read more Read less

Filters

Viewing 221 - 223 of 223 products
Results per page
Description Price Compression Connection Pipe Diameter Fitting Type Material Threaded Connection Fitting Direction Thread Size Thread Standard Gender
RS Stock No. 178-0067
Mfr. Part No.003683
BrandWatts
£6.08
Each
Units
- - Brass - - M1/2 (Outlet) in, MF3/4 (Manifold) in - Female, Male
RS Stock No. 178-0077
Mfr. Part No.003638
BrandWatts
£42.23
Each
Units
- - Brass - - M1 (Outlet) in, MF3/4 (Manifold) in - Female, Male
RS Stock No. 178-0065
Mfr. Part No.003682
BrandWatts
£4.15
Each
Units
- - Brass - - M1/2 (Outlet) in, MF3/4 (Manifold) in - Female, Male
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters ...
Inlet Male 3/4” - Outlet Male 1/2” with ...
Description:
Inlet Male 3/4” - Outlet Male 1/2” with glued valves – End Female 3/4”Body Ø 27. Space 50 mm. Inside F1/2”.Glued valves outlet M1/2”, with reversible proof hot water/cold water. Tested at 10 bar.
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories Suitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters ...
In-line connection of tubing with male thread. Body ...
Description:
In-line connection of tubing with male thread. Body material: Brass Olive: Brass Nut: Brass.