Coaxial Splitters

An RF splitter is designed to divide or merge signals between two or more Radio Frequency ports. Typical applications include combining multiple RF device to a single receiver, such as in connecting televisions to the same aerial or satellite feed.
Applications
RF connectors are used in wireless communication devices, and a splitter can be employed to link these devices where appropriate, such as running a digital television box and a WiFi hub to a single cable input.
Though RF coaxial connections are commonly used in connecting digital television aerials, they are also employed in radio and testing applications, such as shortwave broadcasting and receiving, and EMF measuring equipment.

...
Read more Read less

Filters

Viewing 1 - 7 of 7 products
Results per page
Description Price Interface Type Impedance Operating Frequency Number of Plugs
RS Stock No. 179-2550
Mfr. Part No.R434612001
BrandRadiall
£347.73
Each
Units
SMA 50Ω 2 → 8GHz 3
RS Stock No. 179-2551
Mfr. Part No.R434712003
BrandRadiall
£488.62
Each
Units
SMA 50Ω 6 → 18GHz 3
RS Stock No. 179-2549
Mfr. Part No.R434312001
BrandRadiall
£314.82
Each
Units
SMA 50Ω 2 → 4.2GHz 3
RS Stock No. 179-2548
Mfr. Part No.R434212000
BrandRadiall
£311.40
Each
Units
SMA 50Ω 1 → 2GHz 3
RS Stock No. 179-2547
Mfr. Part No.R434512004
BrandRadiall
£370.94
Each
Units
SMA 50Ω 0.7 → 2.7GHz 3
RS Stock No. 179-2546
Mfr. Part No.R434512005
BrandRadiall
£349.08
Each
Units
SMA 50Ω 0.5 → 2GHz 3
RS Stock No. 2509558527
Mfr. Part No.24-7734P
£17.92
Each
Units
- - - -
Related Products
The FME series HF connectors are used for ...
Description:
The FME series HF connectors are used for mobile equipment → 1.8 GHz. Due to its small size, it can be installed in vehicles. Applications: antennas, car phones etc. Spring-loaded contact parts made from Cu Pb1.5Ni1 and the insulated parts are made from PP with nickel-plated housing parts. Processing is ...
General Applications• High-vibration/low-noise, antenna and test & measurement ...
Description:
General Applications• High-vibration/low-noise, antenna and test & measurement Performance Specifications• Operating Frequency: DC to 11 GHz (50 ohms) DC to 2 GHz (75 ohms)• Nominal Impedance: 50 and 75 ohms• VSWR: 1.30 @ 11 GHz (50 ohms)• Durability: 500 cycles• Temperature Rating: -65°C to +165°C military.
Professional Grade 75 Ohm bulkhead rear and front ...
Description:
Professional Grade 75 Ohm bulkhead rear and front mounting jack-jack adapters with a nickel plated brass body requiring a 12 x 12.7mm panel cut-out.Stock number 680-7469 has a DELRIN dielectric Stock number 718-2556 has a PTFE dielectric.
A range of BNC coaxial connectors from Cinch ...
Description:
A range of BNC coaxial connectors from Cinch that are designed for use with applications such as test equipment and analogue/digital connectivity. Solder or Crimp Versions Available.