Band Heaters

Unlike air heaters, designed to heat air, band heaters are used to reduce the viscosity of thick liquids and gels by heating. This means that the liquid or gel can then be pumped or bottled more easily. Alternatively, band heaters can be used to prevent liquids from freezing prematurely. Usually the kind of liquids these are used for are varnish, resin, tar, or grease.

Types of band heaters

  • Silicone band heaters
    Silicone band heaters are a drum made from silicone and steel. Silicone is used in the construction of heating elements because it has a low thermal mass and excellent thermal transfer properties. This type of band heater can be used with liquids such as oils, grease, soaps and other materials which need to be pumped easily.
  • Base drum heaters
    Steel drums can be placed on the base drum heater in order to make sure heat is targeted at the bottom of the drum. Base drum heaters are typically used in industrial environments which require a very robust heating solution, or to liquefy solids by applying heat directly to the bottom of the drum.

...
Read more Read less

Filters

Viewing 1 - 20 of 33 products
Results per page
Description Price Band Heater Type Peak Temperature Power Rating Supply Voltage Band Dimensions Height Diameter
RS Stock No. 920-9997
BrandRS PRO
£19.31
Each
Units
Nozzle Heater - 560 W 230 V 70 x 50mm 50mm 70 mm
RS Stock No. 920-9956
BrandRS PRO
£18.33
Each
Units
Nozzle Heater - 235 W 230 V 38 x 38mm 38mm 38 mm
RS Stock No. 920-9962
BrandRS PRO
£18.33
Each
Units
Nozzle Heater - 345 W 230 V 40 x 50mm 50mm 40 mm
RS Stock No. 920-9984
BrandRS PRO
£19.31
Each
Units
Nozzle Heater - 375 W 230 V 60 x 38mm 38mm 60 mm
RS Stock No. 920-9966
BrandRS PRO
£18.22
Each
Units
Nozzle Heater - 415 W 230 V 40 x 60mm 40mm 60 mm
RS Stock No. 920-9981
BrandRS PRO
£20.60
Each
Units
Nozzle Heater - 390 W 230 V 50 x 50mm 50mm 50 mm
RS Stock No. 790-4851
BrandRS PRO
£46.26
Each
Units
- +300°C 130 W 240 V - - 50 mm
RS Stock No. 920-9988
BrandRS PRO
£19.31
Each
Units
Nozzle Heater - 440 W 230 V 70 x 38mm 38mm 70 mm
RS Stock No. 920-9975
BrandRS PRO
£18.22
Each
Units
Nozzle Heater - 300 W 230 V 40 x 38mm 38mm 40 mm
RS Stock No. 790-4892
BrandRS PRO
£44.91
Each
Units
- +300°C 130 W 230 V - - 51 mm
RS Stock No. 920-9978
BrandRS PRO
£19.44
Each
Units
Nozzle Heater - 310 W 230 V 44 x 45mm 45mm 44 mm
RS Stock No. 920-9969
BrandRS PRO
£17.19
Each
Units
Nozzle Heater - 270 W 230 V 40 x 38mm 38mm 40 mm
RS Stock No. 790-4849
BrandRS PRO
£40.71
Each
Units
- +300°C 150 W 230 V - - 40 mm
RS Stock No. 374-2763
Mfr. Part No.L2535C12A5
£43.94
Each
Units
Nozzle Heater +340°C 125 W 230 V ac - 35mm 25 mm
RS Stock No. 374-2971
Mfr. Part No.L7050C56A5
£39.74
Each
Units
Nozzle Heater +340°C 560 W 230 V ac - 50mm 70 mm
RS Stock No. 374-3053
Mfr. Part No.L7038C44A15
£47.71
Each
Units
Nozzle Heater +340°C 440 W 230 V ac - 38mm 70 mm
RS Stock No. 374-2735
Mfr. Part No.L2520C6A5
£31.68
Each
Units
Nozzle Heater +340°C 65 W 230 V ac - 20mm 25 mm
RS Stock No. 374-2959
Mfr. Part No.L5050C39A5
£30.65
Each
Units
Nozzle Heater +340°C 390 W 230 V ac - 50mm 50 mm
RS Stock No. 374-2965
Mfr. Part No.L6038C37A5
£32.59
Each
Units
Nozzle Heater +340°C 375 W 230 V ac - 38mm 60 mm
RS Stock No. 374-2808
Mfr. Part No.L3030C13A5
£34.44
Each
Units
Nozzle Heater +340°C 135 W 230 V ac - 30mm 30 mm
Related Products
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. • Air heaters feature an open coil high temperature resistance wire• Wire is electrically isolated in a stainless steel sheath• Can heat air up to 500̊C• Can be ...
Air heaters feature an open coil of high ...
Description:
Air heaters feature an open coil of high temperature resistance wire electrically isolated in a stainless steel sheath. Because the air being heated passes directly over the resistance wire, maximum heat transfer efficiency is achieved. Ar heaters are used for heat staking, plastic welding, laminating, drying, heat sealing, and any ...
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded endsSilver solder sealBand heater connection with waterproof technologyElectric insulation by mica plateAsymmetric winding for better circular ...
Manufactured from silicone coated glass fibre cloth with ...
Description:
Manufactured from silicone coated glass fibre cloth with a stitched glass filament thermal insulation layer. Fixing is via quick release buckles on high temperature webbing straps. The internal heating element comprises high performance resistance wire spiral wound on to a glass core with silicone extruded insulation.Temperature control is by an ...