An EMI filter is a device which is used to suppress electromagnetic interference on a signal or power line. Electromagnetic interference is an unwanted electrical signal and is present in the environment or generated from other equipment.
There are two types of unwanted noise created by electromagnetic interference. Conducted which travels along the electrical conductors and radiated which travels through the air as radio waves or magnetic fields.
Most electronics contain an EMI filter as there are regulations in most countries that limit the amount of noise that can be emitted. Safety standards are required with EMI filters to reduce the risk of fires and electric shock.
Description:
Accessories for use with DKM motors and gearboxes.
• Mounting plates (80 or 90 mm frame size) enable motor/gearbox to be mounted on required installation place• Extension cable (1 m) for connection between speed control motor and speed controller.
Description:
The EAMM-A axial kit and EAMM-U reverse parallel
kit offer a variety of convenient motor mounting options to meet the space constraints of the application. The kit can be mounted in all directions Transmission ratio: i = 1A counter bearing EAMG and a clamping sleeve EAMH-…-P withintegrated trunnion are included ...
Description:
Motor side nut used to secure motor side
foot to cylinder Rod side nut used to secure rod side foot to cylinder Mounting band & switch holder to hold reed sensor in position Suitable sensors are D-M9PL and D-M9NL in the pneumatics cylinder sensors, switches and mounting sections.
Description:
Corcom filters are recognized worldwide for providing EMI/RFI
filtering solutions. TE offers over 70 Corcom filter series that are suitable for a wide range of applications across multiple industries. All Corcom filters have been designed and tested for susceptibility and/or emissions applications and have received approval from major safety agencies ...
