Custom Power Design DC-DC Converter, 300V dc/ 400 mA, 600 mA Output, 11 → 32 V dc Input, Mounting Bracket, +30°C
- RS Stock No.:
- 593-338
- Mfr. Part No.:
- SM1760
- Brand:
- Custom Power Design
Available to back order for despatch 13/08/2024
Added
Price Each
£183.73
(exc. VAT)
£220.48
(inc. VAT)
Units | Per unit |
1 - 4 | £183.73 |
5 - 9 | £178.22 |
10 - 24 | £174.54 |
25 - 49 | £170.87 |
50 + | £167.19 |
- RS Stock No.:
- 593-338
- Mfr. Part No.:
- SM1760
- Brand:
- Custom Power Design
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
Battery to 300Vdc Converter 120W - 3 Pin IEC Output Socket
The SM1760 provides a mains level DC output which is the most efficient means of supplying power to equipment employing switch mode type power conversion (most modern electric equipment).,To check compatibility: Measure the resistance between the live and the neutral pins of the equipments connector (with equipment mains switch in 'on' position). If the resistance is greater than 10KΩ (no mains transformer evident) the equipment should be compatible.
Wide input voltage range (11-32Vdc)
In line input connectors (supplied)
Shuttered IEC output socket
Ignition or remote on/off control by logic compatible input
Inbuilt RFI filter for low noise
High efficiency (84% typical)
High output surge rating
Output short circuit protection
Rugged metal case construction
In line input connectors (supplied)
Shuttered IEC output socket
Ignition or remote on/off control by logic compatible input
Inbuilt RFI filter for low noise
High efficiency (84% typical)
High output surge rating
Output short circuit protection
Rugged metal case construction
Note
Suitable for negative earth battery systems only.,Not suitable for use with equipment employing a 50Hz mains transformer or AC motors.
Caution
The user is responsible for ensuring the suitability of any equipment connected to these vehicle power adaptors. For inside use only. Protect from moisture.
Battery to Mains Level DC Output
Specifications
Attribute | Value |
---|---|
Output Voltage | 300V dc |
Input Voltage Range | 11 → 32 V dc |
Output Current | 400 mA, 600 mA |
Mounting Type | Mounting Bracket |
Depth | 50mm |
Width | 95mm |
Length | 147mm |
Maximum Temperature | +30°C |
Minimum Temperature | -10°C |
Efficiency | 84% |
- RS Stock No.:
- 593-338
- Mfr. Part No.:
- SM1760
- Brand:
- Custom Power Design
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Related links
- Custom Power Design Laptop Car Charger 18V dc Output Plug In, 2A
- Custom Power Design Laptop Car Charger 15V dc Output Plug In, 2.4A
- Custom Power Design DC-DC Converter 24 V dc Input Mounting...
- Custom Power Design Laptop Car Charger 12V dc Output Plug In, 3A
- Custom Power Design DC-DC Converter 19 → 32 V dc Input Mounting...
- Custom Power Design Quasi Sine Wave 200W Power Inverter 230V ac Output
- TDK-Lambda Switching Power Supply 5 V dc 3 A 600 mA Triple Output, 110 →
- Custom Power Design Car Charger 24V dc Output, 500mA