Pulley 222mm Outside Diameter, 16mm Bore

  • RS Stock No. 137-1821
  • Mfr. Part No. RSRB16222L0
  • Brand INA
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): SK
Product Details

Belt Tension Pulleys

INA from Schaeffler Idler pulley units are tensioning systems for belt drives and idler units. The ready-to-fit units comprise deep drawn, profiled sheet steel pulley halves riveted together and deep groove ball bearings. Pulleys of larger diameters are also welded together. A lead chamfer on the pulley profile prevents damage to the belt. Due to the sheet steel construction, the additional rotating masses and the out of balance masses generated are low.

Features and Benefits

• Increase the wrap angle in belt drives and can therefore support higher power levels or allow smaller units to be used • Compensate for belt stretch resulting from operation
• Allow shorter centre distances
• Reduce the wear on the belt drive

Product Application Information

Belt tension pulleys can be used with flat belts, vee belts and round belts.

INA

Specifications
Attribute Value
Overall Diameter 222mm
Pulley Width 50mm
Bore 16mm
Material Steel
2 In stock for FREE next working day delivery
Price Each
£ 56.83
(exc. VAT)
£ 68.20
(inc. VAT)
Units
Per unit
1 - 4
£56.83
5 - 9
£54.55
10 - 24
£53.42
25 +
£52.29
Related Products
These pulleys are designed to be used with ...
Description:
These pulleys are designed to be used with synchronous classic timing belts and are manufactured from high strength material. They are easily re-bored to the required shaft size. 5.1mm ( 1/5 in.) pitch Suitable for belts 6.4mm ( 1/4 in.) and 9.5mm ( 3/8 in.) wide.
Part of an extensive range of High Torque ...
Description:
Part of an extensive range of High Torque Drive (HTD) timing pulleys in pilot bore type and taper lock bush type. The material used for smaller pulleys is Aluminium, medium sizes are in Steel, larger sizes in Cast Iron, all featuring flanges made from steel. HTD, CXP and CXA belts ...
Aluminium timing pulleys to suit all polyurethane timing ...
Description:
Aluminium timing pulleys to suit all polyurethane timing belts Except for 48 and 60 tooth, all pulleys have flanges and all have standard pilot bores.
Suitable for use on drives for belt speeds ...
Description:
Suitable for use on drives for belt speeds of up to 40 metres per second. Compatible with all manufactured V & Wedge Belts, designed to be used with appropriate Taper Bushes. All conform to ISO 4183.