Maxim Integrated MAX14611ETD+T, Voltage Level Translator, Logic Level Translator, 3 State, Open Drain, 14-Pin TDFN

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Improved Interoperability
10kΩ Internal Pullup Resistor
Pin-to-Pin Compatible with the MAX3377E and the MAX3378E
0.9V Operation on Low Voltage Supply
Robust Logic-Level Translation
±0.5V Tolerances on All Pins
±6kV Human Body Model ESD Protection
Thermal Short-Circuit Protection
Short to Ground Fault Protection on All Pins
-40°C to +85°C Operating Temperature Range
Increased Design Flexibility
Ultra-Low Supply Current
Pullup Resistor Enabled with a Single Power Supply when Active-Low TS = High
10Ω (max) Transmission Gate FET
Small, 14-Pin, 3.0mm x 3.0mm TDFN Package and 14-Pin, 4.9mm x 5.1mm TSSOP Package
Applications
Low-Voltage ASIC Level Translation
Mobile Phones
Portable Electronics
POS Systems
SPI, I²C, and MDIO Level Translation
Telecommunications Equipment

Specifications
Attribute Value
Logic Function Logic Level Translator
Translation Bi-Directional
Output Type Open Drain, 3 State
Maximum Propagation Delay Time @ Maximum CL 150ns
Mounting Type Surface Mount
Package Type TDFN
Pin Count 14
Dimensions 3.1 x 3.1 x 0.75mm
Height 0.75mm
Length 3.1mm
Minimum Operating Temperature -40 °C
Width 3.1mm
Minimum Operating Supply Voltage 1.65 V
Maximum Operating Temperature +85 °C
Maximum Operating Supply Voltage 5.5 V
Available to back order for despatch 16/11/2020
Price Each (On a Reel of 2500)
£ 1.183
(exc. VAT)
£ 1.42
(inc. VAT)
Units
Per unit
Per Reel*
2500 +
£1.183
£2,957.50
*price indicative
Related Products
The 74ALVC164245 is a high-performance, low-power, low-voltage, Si-gate ...
Description:
The 74ALVC164245 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVC164245 is a 16-bit (dual octal) dual supply translating transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. It is designed to interface between a 3 V ...
The LVTH125 contains four independent non-inverting buffers with ...
Description:
The LVTH125 contains four independent non-inverting buffers with 3-STATE outputs. These buffers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVTH125 is fabricated with an advanced Bi CMOS technology to achieve high speed operation similar to 5V ...
5V tolerant inputs and outputs2.3V-3.6V VCC specifications provided4.5 ...
Description:
5V tolerant inputs and outputs2.3V-3.6V VCC specifications provided4.5 ns t PD max (VCC = 3.3V), 20 μA ICC max Power down high impedance inputs and outputs Supports live insertion/withdrawal (Note 1)±24 mA output drive (VCC = 3.0V)Uses patented noise/EMI reduction circuitry Latch-up performance exceeds 500 m AESD performance: Human body ...
Description:
High Speed: t PD = 3.5 ns (typ) at VCC = 5VLow power dissipation: ICC = 4 μA (max) at TA = 25°CHigh noise immunity: VNIH = VNIL = 28% VCC (min)Power down protection is provided on all inputs Low noise: VOLP = 0.9V (typ)Pin and function compatible with 74HC541Applications ...