Chauvin Arnoux TX 01, LED Voltage tester, 690V ac/dc, Continuity Check, Battery Powered, CAT III 600V

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Chauvin Arnoux Voltage and Continuity Tester with LEDs - TX0001-Z

Chauvin Arnoux TX0001-Z Voltage and continuity tester allow you to control AC and DC voltages. The Phase tracking system with audible and visual warning of the voltmeter makes your work more efficient and convenient. The self-test function checks the status of the entire tester from battery, test probes, LEDs, the leads and electronics.

Features and Benefits

• Voltage Test: 12 V to 690 V AC/DC (7 LEDs) with buzzer for voltages higher than 50 V • Phase/neutral identification (one-handed!)
• Polarity test: +/- LED
• Audible continuity test (R < 2 kΩ) and diode test
• Resistance Test: 2 kΩ to 300 kΩ (3 LEDs)
• Voltage Protection: 1000 V
• Autotest of 9 V battery and the whole tester assembly, from the test probes to the LEDs, and the lead, the electronics, etc.
• Electrical Safety: IEC 61010 600 V Cat. III
• System for stowing the test probes
• Dimensions: 179 x 47 x 33 mm
• Weight: 170 g

Voltage Level Indicators

A range of voltage testers each available in versions suitable for electronic or electrical applications.

Specifications
Attribute Value
Maximum Voltage 690V ac/dc
Continuity Check Yes
Safety Category CAT III 600V
Display Type LED
RCD Trip Test Yes
IP Rating IP50
Battery Type Alkaline, 9 V
Power Source Battery
Dimensions 47 x 36 x 193mm
Weight 170g
Height 193mm
Length 47mm
Maximum Operating Temperature +55°C
Width 36mm
Minimum Operating Temperature -10°C
Model Number p TX 01
Safety Category Voltage 600V
Safety Category Level CAT III
3 In stock - FREE next working day delivery available
43 available from Europe for delivery within 1 working day(s).
Price Each
£ 28.49
(exc. VAT)
£ 34.19
(inc. VAT)
Units
Per unit
1 +
£28.49
Related Products
Two ranges 12V – 1000V and 50V – ...
Description:
Two ranges 12V – 1000V and 50V – 1000V ACAudible and visual indication Extended probe for easy access Clear tip for high visibility indication LED torch for use in low light LED pulse and auto power off.
The Fluke volt light is a non-contact AC ...
Description:
The Fluke volt light is a non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. This includes dual sensitivity turning blue 2.54cm to 12.7cm from the source and red when at the source. It is a simple solution for locating the presence of voltage. ...
The John Drummond MTL15 has a maximum working ...
Description:
The John Drummond MTL15 has a maximum working voltage of 1000V DC/AC rms and extended nominal voltage threshold indications of 50, 230, 400, 690C DC/AC rms. Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer ...
For safe and reliable live indication Suitable for ...
Description:
For safe and reliable live indication Suitable for non-contact AC voltage tests, earthing/ground connection checks, proper connection checks, broken wire detection High sensitivity tester offering an extensive non-contact voltage detection range of 70-1000V ACBright red LED illumination on detection of AC voltage On/Off switch to help preserve battery life Integrated ...