BH76360FV-E2, Video Driver 1-Channel 6dB 16-Pin SSOP

  • RS Stock No. 171-4080
  • Mfr. Part No. BH76360FV-E2
  • Brand ROHM
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Composite Video Amplifiers, ROHM Semiconductor

BH76360FV and BH76361FV are video signal switching ICs, each with six inputs and one circuit input, which feature wide dynamic range and frequency response. Since these ICs can be used with low voltage starting at VCC=2.8V, they are applicable not only in stationary devices but also in mobile devices. This product line-up supports a broad range of input signals, depending on whether or not a 6dB video amplifier and video driver are included and what combination of sync tip clamp type and bias (resistor termination) type inputs are used.

Able to use a wide range of power supply voltage, from 2.8V to 5.5V
Wide output dynamic range
Excellent frequency response (100kHz / 10MHz 0dB [typ.])
No crosstalk between channels (Typ. -65dB, f=4.43MHz)
Built-in standby function, circuit current during standby is 0μA (Typ.)
Sync tip clamp input (BH76360FV)
Bias input (Zin=150kohm) (BH76361FV)
6dB amp and 75ohm driver are built in
Enables two load drivers [when using output coupling capacitor]
Able to be used without output coupling capacitor (BH76360FV)
SSOP-B16 compact package
Car Audio
Car Navigation
PND (Portable Navigation Device)
Machine Vision Camera for Industrial

Video Amplifiers & Buffers

Attribute Value
Number of Channels 1
Amplifier Gain 6dB
Mounting Type Surface Mount
Package Type SSOP
Pin Count 16
Dimensions 5 x 4.4 x 1.05mm
Length 5mm
Width 4.4mm
Height 1.05mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 2.8 V
Minimum Operating Temperature -40 °C
Available to back order for despatch 01/07/2020, delivery within 5 working days
Price Each (On a Reel of 2500)
£ 0.981
(exc. VAT)
£ 1.177
(inc. VAT)
Per unit
Per Reel*
2500 +
*price indicative
Not available for guaranteed pre 9am/10am delivery
Related Products
These Battery and Crystal Option devices are detachable ...
These Battery and Crystal Option devices are detachable lithium power sources housed in special top called SNAPHAT®. The SNAPHAT is snapped on the top of the surface-mounted IC in the Printed Circuit board. Also compatible with the non-volatile TIMEKEEPER® package by STMicroelectronics.
The AP7384 series is a positive voltage regulator ...
The AP7384 series is a positive voltage regulator IC. The AP7384 has features of wide input voltage range, high accuracy, low dropout voltage, current limit and ultra-low quiescent current which make it ideal for use in various USB and portable devices. The IC consists of a voltage reference, an error ...
Low dropout regulators (LDOs) are a simple and ...
Low dropout regulators (LDOs) are a simple and cost-effective way to get a regulated output voltage from higher input voltage. LDOs provide great simplicity for the system design as they are widely used in broad applications due to no switching noise and small size. Wide Input Voltage Range: Up to ...
The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR. ...