Tempo PTS100/200 50450808 LAN Test Equipment

  • RS Stock No. 331-5226
  • Mfr. Part No. 50450808
  • Brand Tempo
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

PTS100/200 - Pair Tracing Kit

The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs

Fast, Accurate Wire Identification
Sends Tone to Identify Wires
Polarity Indication
Continuity Test
Adjustable Volume Control
Easy to Operate
2-Line Modular Test Lead
Rugged Industrial design
Water Resistant

Typical Applications:

PTS 200 Tone Generator:

The PTS 200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS 200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of.

PTS 100 Probe:

The PTS 100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity Adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone generated by the PTS 200

Note

Only for use on non-powered cables, powered by PP3 batteries (not supplied).
Image for illustration purposes only

50450808 Cable Tracer is equipped with an RJ11 plug.

Specifications
Attribute Value
Model Number PTS100/200
Power Source Battery
Battery Type 9V
13 In stock for FREE next working day delivery
Price Each
£ 63.76
(exc. VAT)
£ 76.51
(inc. VAT)
Units
Per unit
1 +
£63.76
Related Products
Description:
A Cat 6 Self Test will help to determine if you have faulty DSX-PLA004 Permanent Link or DSX-CHA004 Channel Adapters. Insert the DSX-5000 Cable Analyzer modules into the main frames.Power up the main and remote units.Plug in a DSX-PLA004 Permanent Link Adapter into the DSX module on the Versiv/TFS main ...
The Molex Brad Harsh I/O Digital Ethernet module ...
Description:
The Molex Brad Harsh I/O Digital Ethernet module for Modbus TCP, Classic 60mm, 8 Ports M12 and 16 Universal. It has a user configuration of input/output connectors and 5-pole power. They are used as a tester for cables and Ethernet modules. • I/O module is used with Ethernet for testing• ...
The Molex network interface has SST DN4 High-Speed ...
Description:
The Molex network interface has SST DN4 High-Speed USB adapter for Device Net Master/slave. It has 5-pin to 312 sealed Micro-connector-DLL-Control. • Operating temperature ranges from 0°C and 60°C• I/O control.
The C.A. 7028 is a cabling tester able ...
Description:
The C.A. 7028 is a cabling tester able to identify the faults on computer and voice networks.Location and identification of faults at up to 150 metres (or 500 ft): cut pairs, short circuits, crossed or separated circuits, short circuits between pairs, inversions of pairs and continuity of shielding/screen; failures at ...