FTDI Chip, LQFP USB to Serial UART RS232, RS422, RS485 UART 12Mbit/s, 1.8 V, 3.3 V, 48-Pin FT232HL-REEL

  • RS Stock No. 923-1584
  • Mfr. Part No. FT232HL-REEL
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): ID
Product Details

Serial I/O Peripherals, FTDI Chip

Specifications
Attribute Value
Number of Channels per Chip 1
Standard Supported RS232, RS422, RS485 UART
Maximum Data Rate 12Mbit/s
Mounting Type Surface Mount
Package Type LQFP
Pin Count 48
Typical Operating Supply Voltage 1.8 V, 3.3 V
Dimensions 7 x 7 x 1.4mm
Length 7mm
Width 7mm
Height 1.4mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Available to back order for despatch 11/12/2019
Price Each (On a Reel of 1500)
£ 2.244
(exc. VAT)
£ 2.693
(inc. VAT)
Units
Per unit
Per Reel*
1500 - 3000
£2.244
£3,366.00
4500 - 6000
£2.183
£3,274.50
7500 - 13500
£2.126
£3,189.00
15000 - 36000
£2.071
£3,106.50
37500 +
£2.019
£3,028.50
*price indicative
Related Products
The FT245B and FT245R are USB to parallel ...
Description:
The FT245B and FT245R are USB to parallel FIFO converter interfaces. Single chip USB to parallel FIFO bidirectional data transfer interfaceEntire USB protocol handled on the chip - No USB-specific firmware programming requiredFT245B USB compatibleFT245R USB 2.0 Full Speed compatibleFT245R with the FTDIChip-ID security dongle feature.
Description:
The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR. ...
Description:
The Low dropout or LDO is a linear voltage regulator. We have a wide range of linear regulators. The LDO regulator can operate with a small input–output differential voltage. LDO voltage regulators may offer fast transient response, wide input voltage range, low quiescent current and low noise with high PSRR. ...
A Universal Asynchronous Receiver/Transmitter, abbreviated (UART) and universal ...
Description:
A Universal Asynchronous Receiver/Transmitter, abbreviated (UART) and universal synchronous/asynchronous receiver/transmitter (USART) are commonly used in conjunction with communication standards such as EIA, RS-232, RS-422 or RS-485. It takes bytes of data and transmits or receives the individual bits in a sequential fashion. Modem (Modulator-Demodulator) that modulates an analogue carrier signal ...