Honeywell NC 10 A Bi-Metallic Thermostat, Opens at+100°C

  • RS Stock No. 229-5856
  • Mfr. Part No. 2455RP 9100-438 L100C
  • Brand Honeywell
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Basic Bi-MetallicThermostat

PPS Ryton body with steel end cap
Electrical terminals parallel to the mounting face and a floating steel bracket to ease mounting and increase temperature tolerance
N/C types open on temperature rise, N/O types close on temperature rise
1/4in. tab termination
Contacts are rated to 250Vac 10A with a maximum contact resistance of 50mΩ
Dielectric strength of 2000Vac

Note

The contacts are NOT silver plated and are unsuitable for use with low current dc applications

Thermal Switches

Specifications
Attribute Value
Minimum Temperature 0°C
Maximum Temperature +186°C
Opening Temperature +100°C
Thermostat Type Bi-Metallic
Closing Temperature +85°C
Switch Configuration NC
Contact Rating 10 A
Contact Voltage Rating 250 V ac
Terminal Type Solder Tab
758 In stock for FREE next working day delivery
Price Each
£ 7.28
(exc. VAT)
£ 8.74
(inc. VAT)
Units
Per unit
1 - 4
£7.28
5 - 9
£7.05
10 +
£6.67
Related Products
When used in conjunction with a cabinet heater ...
Description:
When used in conjunction with a cabinet heater thermostats can be used to control the temperature inside a control cabinet. These thermostats can also be used with a filter fan to provide benefits in energy consumption, materials and time due to need-based use of the fans. Mechanical bi-metallic thermostat for ...
The surface mount thermostat works on the principle ...
Description:
The surface mount thermostat works on the principle of volume expansion, if the temperature of the filling medium inside the probe increases the volume increases which results in the elevation of a diagrapm that triggers a microswitch. IP54 Rated1x SPDT switching contact Temperature control or temperature monitoring functions Differential of ...
Push-in RTD temperature probes are mainly used for ...
Description:
Push-in RTD temperature probes are mainly used for measuring temperature in liquids and gasses. The application areas, among others, are the air conditioning and refrigeration industry, in the construction of heating systems/furnaces/equipment, and in laboratory technology.Depending on the version, the connection cables are suitable for dry or moist rooms with ...
Panel-mounting electronic hot-cold thermostat-thermometers with setpoint.Protection in the ...
Description:
Panel-mounting electronic hot-cold thermostat-thermometers with setpoint.Protection in the event of a probe fault.Units supplied with 1.5 m silicone PTC probe (IC 901 and IC 902).Protection of compressor relay by time delay (anti-short cycle).Possible to display decimal point (IC 902).(IC 901 A): 1 relay alarm output, 1 built-in buzzer.