Honeywell NC 10 A Bi-Metallic Thermostat, Opens at+100°C

  • RS Stock No. 228-2608
  • Mfr. Part No. 2455RM 9082-470 L100
  • Brand Honeywell
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Manual Reset Bi-Metallic Thermostat

Designed for applications that require status indication of over temperature
Snap action bi-metallic disc, electrically and thermally isolated from the switch, actuates the normally closed contacts
Manual reset can be operated at approximately 70% of the opening temperature
Dust-free phenolic housing with heat sensitive disc retained by a heat conducting stainless steel end cap
1/4in. tab termination
Contacts are rated to 250Vac 10A with a maximum contact resistance of 50mΩ
Dielectric strength of 2000Vac

Approvals

UL recognised component, CSA Certified

Thermal Switches

Specifications
Attribute Value
Minimum Temperature +50°C
Maximum Temperature +150°C
Opening Temperature +100°C
Thermostat Type Bi-Metallic
Switch Configuration NC
Contact Rating 10 A
Contact Voltage Rating 250 V ac
Terminal Type Solder Tab
1278 In stock - FREE next working day delivery available
Price Each
£ 8.30
(exc. VAT)
£ 9.96
(inc. VAT)
Units
Per unit
1 - 4
£8.30
5 - 9
£8.06
10 +
£7.60
Related Products
Allows switching times and room temperatures to be ...
Description:
Allows switching times and room temperatures to be set over a 7 day or 5//2 day period Suitable for surface or conduit box mounting.Six time/temperature settings Holiday and manual mode Digital display with ’call for heat’ indication Built-in start up programme Powered by 2 AA batteries (supplied). 7 Day Programmable. ...
This is a modern wireless 7-day Programmable Room ...
Description:
This is a modern wireless 7-day Programmable Room Thermostat. It is designed to provide automatic time and temperature control of domestic systems in domestic or light commercial premises. Compatible with 24-230V on/off appliances such as gas boilers, combi-boilers and zone valves The T4 can be used as a temperature sensing ...
Two electronic central heating programmers for use with ...
Description:
Two electronic central heating programmers for use with fully pumped or gravity primary systems which have separate heating and hot water control. 7 day or 24 hour versions available Manual control, 1 or 2 On/Off periods per day with an advance Integral battery back-up in case of mains failure Programme ...
Designed for external contact mounting on hot water ...
Description:
Designed for external contact mounting on hot water cylinders, this unit has a large contact area for good heat transfer. Ideal for eliminating boiler short cycling to reduce energy consumption. Also suitable for pipe mounting. Graduated knob for temperature adjustment Easy fixing with supplied hardware Ingress protection to IP40. Cylinder ...