Fluke Test Probe, 60V

Brought to you by Fluke, a range of accessories, including test leads and test probes suitable exclusively for Fluke Multimeters. Whether it's a test lead or a probe set, dependent on the application, all accessories will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Durable connection, which guarantees excellent results
• Fantastic electronic set
• CAT II 300 V
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision

• 1.0m silicone lead terminated at one end with 4mm shrouded right angled plug and stainless steel test probe on the other end. Rated 10A
• Insulated crocodile clip. Rated 5A
• Insulated probe tip extender. Rated 3A
• 1.0m silicone modular test lead terminated at one end with 4mm shrouded right angled plug and straight 4mm on the other end. Rated 10A
• Modular hook-style clip test lead with 4mm connector. Rated 5A
• Modular pinch style clip with 4mm connector. Rated 5A
• Modular crocodile clip with 4mm connector. Rated 5A
• Slide on IC probe tip adaptor (rated 3A) and test lead couplers
• 2 bare spade plugs with 4mm connectors, rated up to 10A, 60V dc max
• TL81A contents 2 each (1 red and 1 black)

Looking for precision testing that measures up? FLUKE has got you covered with these test probes. They're rigid back pins that slide onto 2mm probes and are used to make contact with a circuit or component for testing or measurement purposes. You'll find them used in the calibration of automotive electrical systems, such as sensors and ignition systems. The sharp, pointed tip can easily penetrate insulation, so you can be sure of accurate and consistent measurements.

• Insulated pin protects against short-circuiting
• Safety category voltage of 60V provides safety against electric shocks
• Black and red colours are easy to identify

• Automotive systems
• Telecommunications
• Medical devices
• Power generation and distribution

The probes are two inches long. This short size is a reliable way to reduce the signal interference or noise that you might experience when using longer devices.

The stainless steel probes are resistant to corrosion and impacts, so you can rest assured they can stand up to the demands of harsh industrial settings.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends £150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.co.uk/freefluke
A proof of purchase in the form of a receipt or invoice is required.