STMicroelectronics STCN75DS2F, Temperature Sensor -55 → +125 °C ±3°C Serial-I2C, SMBus, 8-Pin MSOP

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

STD/STL/STT/STCN/STLM Digital Temperature Sensors & Thermal Watchdog

The STD/STL/STT/STCN/STLM series of CMOS digital temperature sensors & thermal watchdog have been designed to monitor and measure temperature using an on-chip band gap temperature sensor and ADC that converts temperature into digital form.

Typical applications include PCs, industrial controllers, electronics equipment and system thermal management.


Features;
I²C serial interface
-55°C to +125°C temperature range
2.7 V to 5.5 V operating voltage range
125 μA operating current
Shutdown mode

Temperature & Humidity Sensors, STMicroelectronics

Specifications
Attribute Value
Sensor Function Temperature
Output Type Digital
Interface Type Serial-I2C, SMBus
Accuracy ±3°C
Mounting Type Surface Mount
Pin Count 8
Operating Temperature Range -55 → +125 °C
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 5.5 V
Package Type MSOP
Length 3mm
Height 0.85mm
Width 3mm
Dimensions 3 x 3 x 0.85mm
Resolution 9 bit
Available to back order for despatch 12/03/2021
Price Each (On a Reel of 1000)
£ 0.302
(exc. VAT)
£ 0.362
(inc. VAT)
Units
Per unit
Per Reel*
1000 +
£0.302
£302.00
*price indicative
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in ...
Vertical Hall plates to measure magnetic field parallel ...
Description:
Vertical Hall plates to measure magnetic field parallel to PCB and package surface3.5V to 32V operating supply voltage Operation from unregulated power supply Reverse polarity protection (-18V)Overvoltage capability up to 42V without external resistor Low current consumption Output short-circuit & overtemperature protection High stability of magnetic thresholds Small SMD package ...
The US5781 is a unipolar Hall-effect switch designed ...
Description:
The US5781 is a unipolar Hall-effect switch designed in mixed signal CMOS technology.The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.Thanks to its wide operating voltage range and extended choice of temperature range, it ...
The US5881 is a low sensitive unipolar Hall-effect ...
Description:
The US5881 is a low sensitive unipolar Hall-effect switch designed in mixed signal CMOS technology.The device integrates a voltage regulator, Hall sensor with dynamic offset cancellation system, Schmitt trigger and an open-drain output driver, all in a single package.Thanks to its wide operating voltage range and extended choice of temperature ...