• RS Stock No. 118-1368
  • Brand Electrolube
  • Mfr. Part No. SMA10SL
Electrolube
Electrolube Epoxy Surface Mount Adhesive, 30 (90 °C) min, 4 (120 °C) min Cure, 10 ml Syringe
Product Details

Surface Mount Adhesive, SMA

A heat curable, one part thixotropic adhesive for use in holding components in place during soldering operations of surface mount assemblies.

High uncured green strength and fast cure cycle with medium bond strength
Thixotropic properties give high dot profile
Excellent mechanical strength
Not affected by UV light
Resistant to PCB cleaning solvents
Medium strength cure allows component removal for rework
Hardness (shore) 85
Dielectric constant 3.5 @ 1 kHz

Add product to Compare
Specifications
Not what you’re looking for? Select the attributes you require, then click the button below
TypeThermal Conductive Adhesive
Product MaterialEpoxy
Package TypeSyringe
Package Size10 ml
Thermal Conductivity0.25 → 0.3W/m°C
Cure Time4 (120 °C) min, 30 (90 °C) min
Maximum Operating Temperature+130°C
Minimum Operating Temperature-40°C
Operating Temperature Range-40 → +130 °C
Select all
Customer reviews

Add a review - Log In

57 In stock for FREE next working day delivery
£19.38
Price Each
Quantity
Units
Check stock levels
Technical Reference
  • RS Components

    Statement of conformity


    The product detailed below complies with the specifications published by RS Components. Where applicable it provides assurance that electrostatic discharge sensitive devices have been handled and packed under conditions that meet the administrative and technical requirements of the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards.
    RS Stock No. 118-1368
    Description Electrolube Epoxy Surface Mount Adhesive, 30 (90 °C) min, 4 (120 °C) min Cure, 10 ml Syringe
    Manufacturer/Brand: Electrolube
    Mfr. Part No. SMA10SL
    The foregoing information relates to product sold on, or after, the date shown below.
    RS COMPONENTS
    Date Jan 18, 2018
    RS Components Ltd, Birchington Road, Corby, Northamptonshire, NN17 9RS, UK
Similar Products
View Similar Products

Alternative for Electrolube Epoxy Surface Mount Adhesive, 30 (90 °C) min, 4 (120 °C) min Cure, 10 ml Syringe

You may also like

Related Products
Extended open & fixture time methacrylate adhesive. Superior ...
Description:
Extended open & fixture time methacrylate adhesive. Superior bond strength and durability Bond is load bearing & resistant to weathering. Wide temperature range -55°C to +120°C10-11 minute pot life, fixture time 30-35mins, functional cure 24 hrs. Excellent shear, peel & impact strength. Hydrocarbons; Acids; Bases; Salt Solutions. Excellent environmental and ...
High impact textured low profile aluminium alloy cover. ...
Description:
High impact textured low profile aluminium alloy cover. Warp proof self extinguishing UL approved PVC base with maximum service temperature of 85°CSelf adhesive tape applied to the PVC base for quick easy installation. RS aluminium floor surface trunking is designed for mounting on floors for routing low voltage and signal ...
Cures in seconds at room temperature. High temperature ...
Description:
Cures in seconds at room temperature. High temperature and thermal cycling resistant. Clean, accurate applications. Will not flow into unwanted areas. Bonds variety of materials, metals, varnished and lacquered surfaces, most plastics, GRP, ceramics, ferrites, rubber and paper180° peel 2N/mm (12 lb/in.) Impact shear: 21N/mm² (10ft. lb/in²) Melting point: 165°CTensile ...
Brush contained in lid of bottle. Tack-free after ...
Description:
Brush contained in lid of bottle. Tack-free after 10 minutes, full cure in 24 hours to allow fine tuning. Choice of colour. Can be physically removed with screwdriver or similar tool. One part air-drying, tamper evident seal for screws, nuts, tuneable items and other 'factory fixed' components. Also for application ...
Frequently Asked Questions
Need some help?
Call our Customer Services team on:
08457 201201