Geckodrive GM215 Stepper Motor Controller 7 A, 18 → 80V dc, 2.5 x 2.5 x 0.85in

  • RS Stock No. 793-4133
  • Mfr. Part No. GM215
  • Brand Geckodrive
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

GM215 - Multi-mode Step Motor Controller

The GM215 is a stepper drive with a full motion controller. 15 operating modes include Motion Control, stand-alone control and sub-micro stepping for the smoothest possible operation of your stepper motor.

Midband resonance compensation
Motor smoothness, ARC Damping and VCO trim pots
Terminal block 12-position 5mm
Full motion controller with non-volatile memory
Capable of running as a standalone solution
Hard anodized electrically isolated heatsink
Maximum power dissipation of 13W
Recommended for NEMA 17-42 size motors
DIP switch settable current and option adjust

Specifications
Attribute Value
For Motor Type NEMA 17 to 42 Size
Current Rating 7 A
Board Supply Voltage 18 → 80V dc
Motor Supply Voltage 18 → 80V dc
Overall Length 2.5in
Overall Width 2.5in
Overall Depth 0.85in
5 In stock for FREE next working day delivery
Price Each
£ 263.35
(exc. VAT)
£ 316.02
(inc. VAT)
Units
Per unit
1 +
£263.35
Related Products
Travel distances, positions, speeds, operating times - easily ...
Description:
Travel distances, positions, speeds, operating times - easily defined with the new web-based control system for drylin® E linear systems from igus®. No software or app installation necessary, fast commissioning Control possible via smartphone (browser), tablet or laptop Simple and intuitive user interface, control system set up in just a ...
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unit IP54 protection PanelmountingCut out 68x68 mm For use with the APM110E load monitor (Stock-no.: 793-4109). ...
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadrature Host control mode Idle current reduction Anti-resonance Torque ripple smoothing Microstep emulation8 digital inputs4 digital outputs May be fitted with option boards to ...
ST5-S and ST10-S step drives offer the following ...
Description:
ST5-S and ST10-S step drives offer the following features:. Pulse and direction CW/CCW pulseA/B quadrature Analogue velocity (oscillator) mode Host commands (SCL compatible)Si Net hub (HUB 444, stock no. 455-867) compatible ST Configurator software for setup (software included).