Applied Motion Systems ST5-SI Stepper Motor Controller 5 A, 24 → 48V dc, 5 x 3 x 1.75in

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

ST5-Si and ST10-Si Programmable Stepper Drive

ST5-Si and ST10-Si programmable step drives offer the following features:

Software setup using ST Configurator (software included)
Microstepping 200 to 58000 steps/rev.
Pulse and direction: pulse/direction, CW/CCW, A/B quadrature
Host control mode
Idle current reduction
Anti-resonance
Torque ripple smoothing
Microstep emulation
8 digital inputs
4 digital outputs
May be fitted with option boards to provide an encoder feedback option (ST-ENC, stock no. 455-857) and RS-485 option (ST-RS485, stock no. 455-835)

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 5 A
Board Supply Voltage 24 → 48V dc
Overall Length 5in
Overall Width 3in
Overall Depth 1.75in
Available to back order for despatch 31/12/2019
Price Each
£ 473.66
(exc. VAT)
£ 568.39
(inc. VAT)
Units
Per unit
1 +
£473.66
Related Products
Travel distances, positions, speeds, operating times - easily ...
Description:
Travel distances, positions, speeds, operating times - easily defined with the new web-based control system for drylin® E linear systems from igus®. No software or app installation necessary, fast commissioning Control possible via smartphone (browser), tablet or laptop Simple and intuitive user interface, control system set up in just a ...
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unit IP54 protection PanelmountingCut out 68x68 mm For use with the APM110E load monitor (Stock-no.: 793-4109). ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protection Synchronisation output for multi-axis systems Full and half step drive modes TTL & CMOS compatible control interface Output disable input5 & 12Vdc auxiliary outputs for external device energisation Status LED's for condition monitoring Provision ...
Drives motors up to 85V and 6A/phase On ...
Description:
Drives motors up to 85V and 6A/phase On board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumption Single supply rail simplifies power supply requirements Short-circuit and open circuit protected stage for increased reliability Selectable full or half step ...