INA 15 Tooth Sprocket, KSR16-L0-12-10-15-09

  • RS Stock No. 174-1131
  • Mfr. Part No. KSR16-L0-12-10-15-09
  • Brand INA
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

NA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds. The ready-to-fit units comprise sprockets and deep groove ball bearings or radial insert ball bearings. The sprockets are made from high strength steel, sintered iron or plastic (polyamide). Sprockets made from plastic give particularly smooth running and generate very little noise. Since the inner ring of the deep groove ball bearing is extended on both sides, no additional spacer rings are required. In series KSR..-B0, the inner ring is located on the shaft by means of a locking collar. The bearing bore of this series has a plus tolerance.

Roller chain idler sprocket units
Sealing
Lubrication
Idler pulley units
Sealing
Lubrication
Operating temperature

Specifications
Attribute Value
Number of Teeth 15
Maximum Bore Diameter 16.2mm
Pitch Diameter 91.6mm
Sprocket Width 18.3mm
Available to back order for despatch 28/07/2020
Price Each
£ 57.58
(exc. VAT)
£ 69.10
(inc. VAT)
Units
Per unit
1 +
£57.58
Related Products
Steel taper bush sprockets for BS standard roller ...
Description:
Steel taper bush sprockets for BS standard roller chain. For use with taper bushes.
INA roller chain idler sprocket units are guidance ...
Description:
INA roller chain idler sprocket units are guidance and return units for roller bush chains and roller chains. They can compensate for chain stretch resulting from operation and give smoother system running under high loads and speeds. • Sprocket made from steel or sintered iron • GA13 lithium soap grease ...
The RESATEC chain sprocket set is designed to ...
Description:
The RESATEC chain sprocket set is designed to be used with the universal belt tensioner and the chain tensioner CRS from RESATEC. The set is made from galvanised steel with a high quality ball bearing.