Freewheel/Bearing CSK-PP 25mm

  • RS Stock No. 146-5251
  • Mfr. Part No. CSK 25-PP
  • Brand Stieber
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible.

Specifications
Attribute Value
Series 6205
Inside Diameter 25mm
Outside Diameter 52mm
Race Width 15mm
Torque 85Nm
Over-running Speed 5200rpm
Dynamic Load Rating 10.7kN
Static Load Rating 5.46kN
Keyway Inner and Outer Race
Drag Torque 2Ncm
2 In stock - FREE next working day delivery available
Price Each
£ 89.68
(exc. VAT)
£ 107.62
(inc. VAT)
Units
Per unit
1 - 4
£89.68
5 +
£86.09
Related Products
INA from Schaeffler radial insert ball bearings with ...
Description:
INA from Schaeffler radial insert ball bearings with rubber interliners are on the shaft using an eccentric locking collar. The outer ring is encased in a thick-walled NBR interliner which absorbs vibrations and shocks. The interliners have either a spherical or cylindrical outside surface. The P seal is two zinc-coated ...
INA from Schaeffler angular contact ball bearings have ...
Description:
INA from Schaeffler angular contact ball bearings have a double row design and lip seals on both sides. • Lower operating costs • Reduced maintenance due to improved lubrication • Lower heat generation • Less noise • Sealed. Angular Contact Ball Bearings. INA.
FAG from Schaeffler deep groove ball bearings are ...
Description:
FAG from Schaeffler deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products are of simple design, durable in operation and easy to maintain. They are available in single and double row designs and in open and sealed variants. ...
Bearing arrangements must support combined loads, i.e. radial ...
Description:
Bearing arrangements must support combined loads, i.e. radial and axial loads acting simultaneously Moderate to high axial loads are present on one side Rigid axial guidance is required The bearing arrangement must be axially clearance-free or preloaded High speeds are required under higher radial and axial loads The bearing arrangement ...