- RS Stock No.:
- 189-4790
- Mfr. Part No.:
- ASSR-5211-001E
- Brand:
- Broadcom
- RS Stock No.:
- 189-4790
- Mfr. Part No.:
- ASSR-5211-001E
- Brand:
- Broadcom
Technical Reference
Legislation and Compliance
Product Details
High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16Ω)
The ASSR-5211 Solid State Relay (SSR) is specifically designed for high current applications, commonly found in the industrial equipments.The relay is a solid-state replacement for single-pole, normally-open, (1 Form A) electromechanical relays.
The ASSR-5211 consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.
The ASSR-5211 connection A, as shown in the schematic, allows the relay to switch either ac or dc loads. The connection B, with its advantages of reduced on-resistance and higher output current, allows the relays to switch dc loads only.
The electrical and switching characteristics are specified over the temperature range of -40°C to +85°C.
ASSR-5211, High Current, 1 Form A, Solid State Relay (MOSFET), 600V/0.2A/16Ohm)
Features
- Compact Solid-State Bi-directional Signal Switch
- Single Channel Normally-off
- Single-Pole-Single-Throw (SPST) Relay
- 600V Output Withstand Voltage
- 0.2A or 0.4A Current Rating
- Low On-Resistance: 4Ω Typical for DC-only, 16Ω Typical for AC/DC
- High Speed Switching: 0.7ms (Ton), 0.07ms (Toff) Typical
- High Transient Immunity: >1kV/μs
- High Input-to-Output Insulation Voltage (Safety and Regulatory Approvals)
3750 Vrms for 1 min per UL1577
CSA Component Acceptance
Applications
- Industrial Controls
- Factory Automation
- Data Acquisition
- Measuring Instrument
- Medical System
- Security System
- EMR / Reed Relay Replacement
Optocouplers, Avago Technologies
Specifications
Attribute | Value |
---|---|
Maximum Load Current | 0.4 A |
Mounting Type | Surface Mount |
Maximum Load Voltage | 600 V |
Minimum Load Voltage | 600 V |
Maximum Control Voltage | 0.8 V |
Switching Type | AC/DC, DC Only |
Terminal Type | 6 Pin |
Contact Configuration | SPST |
Output Device | MOSFET |
Package Style | DIP |
Load Voltage Range | -600 → +600V |
Series | ASSR-5211 |
Maximum Turn On Time | 5ms |
Dimensions | 9.9 x 6.6 x 3.68mm |
Height | 3.7mm |
Minimum Operating Temperature | -40°C |
Special Features | High-Speed Photovoltaic Diode Array |
Depth | 6.6mm |
Off State Leakage Current | 1 μA |
Maximum Operating Temperature | +85°C |
Length | 9.9mm |
Capacitance | 0.8pF |
Operating Temperature Range | -40 → +85°C |
Related links
- Broadcom ASSR-4110 Series Solid State Relay Surface Mount 0.8 V Control
- Broadcom ASSR-15XX Series Solid State Relay Surface Mount 0.8 V Control
- Broadcom ASSR-V62X Series Solid State Relay Surface Mount, 0.8 V Control
- Broadcom ASSR-1611 Series Solid State Relay Surface Mount 0.8 V Control
- Broadcom Solid State Relay Surface Mount, 0.8 V Control
- Broadcom Solid State Relay Surface Mount 0.8 V Control
- Broadcom ASSR-1510 Series Solid State Relay Surface Mount 0.8 V Control
- Broadcom ASSR-1218 Series Solid State Relay Surface Mount 0.8 V Control