Burkert Solenoid Valve 134590, 2 port , NC, 24 V dc, 1/2in

  • RS Stock No. 313-2087
  • Mfr. Part No. 134590
  • Brand Burkert
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Series 5404 Two-way High Pressure Normally Closed, Servo Assisted Solenoid Valve

Brass body with polyamide coil, PTFE seal material and stainless steel 1.4310 spring
High reliability
Unaffected by pressure surges
Easy coil change
Coil can be locked in four 90° positions, or move between as required
For use with compressed air pressure systems and gas turbines using compressed air; natural gas and water
Operating tempeature range -10 to +90°C
Protection rating IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L313208-01.gif
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Compressed Air, Hydraulic Oil, Neutral Media, Water
Type 2/2
Orifice Diameter 12mm
Body Material Brass
Maximum Working Pressure 50 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Series 5404
Maximum Closing Time 1500ms
Thread Standard or Connection Type G
Flow Factor Kv 2m³/h
Servo Assist Yes
Connection Gender Female
Maximum Opening Time 400ms
92 In stock for FREE next working day delivery
Price Each
£ 135.68
(exc. VAT)
£ 162.82
(inc. VAT)
Units
Per unit
1 +
£135.68
Related Products
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain models will work best when the solenoid coil is mounted ...
Two-way, direct operated coaxial valves for high flow/high ...
Description:
Two-way, direct operated coaxial valves for high flow/high pressure fluids, zero bar minimum operating pressure, normally closed with threaded port connection. Brass body Pressure not required for operation Compatible with viscous or abrasive gases and liquids Maximum viscosity 500c St (mm²/s)Valves satisfy article 3.3 of Pressure Equipment Directive 97/23/ECCan be ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media Suitable for vacuum For systems with low or fluctuating pressure conditions Defined flow direction Valve works without minimum pressure differential Electromagnetically actuated With forced lift Closing damping Without tool, interchangeable magnet (Click-on®).
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors Water dispensing & purification Cooling systems Medical and dental devices Welding equipment Lubrication equipment ...