Asco Solenoid Valve SCB262C007V-230 VCA, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 306-1373
  • Mfr. Part No. SCB262C007V-230 VCA
  • Brand Asco
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): NL
Product Details

Direct control 2//2 solenoid valves, series 256 and 262

2 // 2 NC and 2//2 N/O direct control solenoid valves
Pluggable connectors.
Standard FPM sealing trim allowing a wider range of temperatures for the 256 series.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in NPT Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, High Pressure Oil, Inert Gas, Water
Type 2/2
Orifice Diameter 3.2mm
Body Material Stainless Steel
Maximum Working Pressure 11 bar
Operating Temperature Range -20 → +90 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +90°C
Connection Gender Female
Series 262
Flow Factor Kv 0.3m³/h
Maximum Closing Time 25ms
Thread Standard or Connection Type NPT
Maximum Opening Time 25ms
2 In stock for delivery within 1 working days
Price Each
£ 116.60
(exc. VAT)
£ 139.92
(inc. VAT)
Units
Per unit
1 - 4
£116.60
5 +
£111.81
Not available for guaranteed pre 9am/10am delivery
Related Products
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° incrementsDuty cycle intermittent operation 40% 30 min8W nominal coil powerPower consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero head pressure capabilityFluid temperature range: -30 → +80°C (EPDM), 0 ...
Two-way, normally closed, condensate drain valve assembly with ...
Description:
Two-way, normally closed, condensate drain valve assembly with electronic timer. Condensate Drain Valves are ideally suited to be used with compressors, are compact and lightweight, and offer adjustable on and off periods. Timer designed for automatic control of condensate draining periodsDIN plug connectionOn periods adjustable between 2 and 40 secondsOff ...
Modular direct acting solenoid valve system. Brass body ...
Description:
Modular direct acting solenoid valve system. Brass body with polyamide coilCoil can be changed easily with valve in placeCoil can be locked in four by 90° positions or move free between, as requiredFPM high quality seal material Suitable for compressed air; natural gas; water and hydraulic oilMaximum operating temperature: 55°CPower ...
The direct-acting 2/2-way, normally closed type 6013Ex solenoid ...
Description:
The direct-acting 2/2-way, normally closed type 6013Ex solenoid valve is suitable for use with neutral and aggressive gases and fluids, for example: compressed air, town and natural gas, water, and hydraulic oil, in filling, dosing, and batching applications. The coil orientation can be varied through 360° to facilitate wiring. Installation ...