Asco Solenoid Valve SCE238D002 24 DC, 2 port , NC, 24 V dc, 1/2in

  • RS Stock No. 488-857
  • Mfr. Part No. SCE238D002 24 DC
  • Brand Asco
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Two-Way, Pilot Operated, Minimum Pressure, N/C Valves

Two-way, pilot operated solenoid valves, minimum operating pressure required, normally closed with threaded port connection.

Brass body
Minimum operating pressure required
Compact & lightweight
DIN plug connection
Ranging from -20 to +85°C
Can be mounted in any position


Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Pilot
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Water
Type 2/2
Orifice Diameter 12mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Connection Gender Female
Series 238
Flow Factor Kv 2.4m³/h
Thread Standard or Connection Type G
Maximum Closing Time 90ms
Maximum Opening Time 30ms
25 In stock for FREE next working day delivery
Price Each
£ 66.76
(exc. VAT)
£ 80.11
(inc. VAT)
Per unit
1 - 4
5 +
Related Products
The SMC VX 2 Port Direct Operated Solenoid ...
The SMC VX 2 Port Direct Operated Solenoid Valve is suitable for use with air, water, oil and medium vacuum environments. Air models are available with aluminium or resin bodies, while water/oil/medium vacuum models are available with brass or stainless steel bodies. Large flow rate (20% more for Size 1* ...
The Type 5282 Burkert solenoid valve is specially ...
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of challenging applications. Less sensitive to dirty fluids and corrosion resistant ...
Insensitive to contaminated fluids except for sharp, solid ...
Insensitive to contaminated fluids except for sharp, solid and long fibres Body and lid material PVC; internal parts PVDF and PVC; EPDM seals Double seal to valve interior Non-metallic valve internals Lockable manual override Pressure range: 0.5 to 6 bar Power consumption 20VA (Inrush ac); 11VA/5W (Operation ac); 5W dc ...
Asco’s solenoid coil is predominantly used with solenoid ...
Asco’s solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. It has been created and designed to withstand and operate in aggressive conditions and fluctuating temperatures. • This coil is ideal as a replacement ...