Asco Solenoid Valve E262C022SCD2, 2 port , NC, 24 V dc, 1/4in

  • RS Stock No. 488-431
  • Mfr. Part No. E262C022SCD2
  • Brand Asco
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Two-way, Direct Operated, Zero Pressure, N/C Valves

Two-way, direct acting solenoid valves, normally closed with threaded port connection.

Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position

Note

Pressure ranges are for water and may differ for other media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 2/2
Orifice Diameter 3.2mm
Body Material Brass
Maximum Working Pressure 4 bar
Operating Temperature Range -20 → +75 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Series 262
Maximum Opening Time 25ms
Connection Gender Female
Thread Standard or Connection Type G
Flow Factor Kv 0.3m³/h
Maximum Closing Time 25ms
Available to back order for despatch 07/04/2020
Price Each
£ 103.95
(exc. VAT)
£ 124.74
(inc. VAT)
Units
Per unit
1 +
£103.95
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittings IP65 rated 3-pin DIN connector can be positioned through 360° in 90° increments Zero head pressure capability Lockable manual override Fluid temperature range -30 to +90°CMay ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A 8W d.c.Zero head pressure capability Fluid temperature range: -30 → ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors Water dispensing & purification Cooling systems Medical and dental devices Welding equipment Lubrication equipment ...
Control valve for valves actuated by external fluids ...
Description:
Control valve for valves actuated by external fluids Suitable for Series 84720 (RS stock no. 529-5130) and 84740 (RS stock no. 529-5168)3 / 2-way For neutral gaseous and liquid fluids Complete with connection nuts and seal Ventilation, noise insulated Low energy consumption Compact design Magnet can be replaced without tools ...