Burkert Solenoid Valve 125333, 3 port , NC, 24 V dc, 1/8in

  • RS Stock No. 439-004
  • Mfr. Part No. 125333
  • Brand Burkert
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6014 General Purpose Solenoid Valve

Brass bodied, normally closed solenoid valves.

Coil changed easily with valve in place
Two female ports and a 1/8 in. male vent port
Coil can be locked in four by 90° positions or move free between, as required
Brass body and FKM high quality seal material
Epoxy encapsulated coil
Fluid temperature range: -10 to +90°C
Suitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)
Maximum viscosity: 21mm2/s
Operating temperature: –10 to +100°C max.
Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.)
Protection to IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L439004-03.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Series 6014
Maximum Opening Time 15ms
Connection Gender Female
Thread Standard or Connection Type G
Maximum Closing Time 20ms
Flow Factor Kv 0.11m³/h
49 In stock for FREE next working day delivery
Price Each
£ 57.61
(exc. VAT)
£ 69.13
(inc. VAT)
Units
Per unit
1 - 4
£57.61
5 +
£55.84
Related Products
These valves are two-way, direct operated solenoid valves ...
Description:
These valves are two-way, direct operated solenoid valves for liquid CO2. Suitable for high pressure applications and have zero bar minimum operating pressure, are normally closed with a threaded port connection. Brass body Pressure not required for operation Compact & lightweight DIN plug connectionCan be mounted in any position.
Burkert proportional solenoid valves provide continuously adjustable and ...
Description:
Burkert proportional solenoid valves provide continuously adjustable and smooth control over the flow of fluid passing through them. Unlike conventional solenoid and process valves which offer only On or off control, Burkert 2871 series process valves use PWM (pulse width modulation) to give you the ability to adjust the flow ...
Valves and control modules designed specifically to operate ...
Description:
Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions. Control solenoids, signalling support and mini-sensor for E290 series valves.
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil ...