440G-T Solenoid Interlock Switch Power to Unlock 24 V ac/dc

Allen Bradley Guardmaster Guard Locking Switch

The Allen Bradley Guardmaster TLS-GD2 series positive mode, tongue operated guard locking interlock switch locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. This switch has three safety (NC) contacts and two auxiliary (NO) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. It is provided with a blanking plug to seal the unused slot. It has a power-to-release function, also has five sets of contacts of various forms and are suitable for use with PLCs.

Note:
Actuator is not supplied and must be ordered separately
.
Incorporates a power-to-unlock function

Warning:
With the “power to lock” function, provisions are required to ensure that a dangerous situation cannot result from open circuit faults or power cuts.

Features and Benefits

The supply voltage is 24VAC/DC

Power-to-release
High locking force of 2000N (450lb)
Five contacts are 2NC and 1NO for door position monitoring, 1NC and 1NOfor lock monitoring
Rotatable head and four possible actuator entry positions
Lid mount status indication
Three manual release points with security screws for use in the event of an emergency
Suitable for high-pressure, high temperature and wash down
Key release lids available for unlocking the locking mechanism in emergencies
Rated insulation voltage is 500V
Thermal current is 10A
Conduit entry is M20

Certifications

EN954-1
ISO13849-1
IEC/EN60204-1
NFPA79
EN1088
ISO14119
IEC/ EN60947-5-1
ANSI B11.19, AS4024
CE certified
UL approved
cULus approved
TUV certified
CCC certified
IP69K rated