Asco Solenoid Valve Coil 400727-185, Series 552/553 24 V dc

  • RS Stock No. 656-3349
  • Mfr. Part No. 400727-185
  • Brand Asco
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

CM25 coils For 107 series solenoid valves

CM25 coils for 107 series solenoid valves.
Magnetic heads.
Wire lead with earth bonding.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
For Use With Solenoid valve
Series 552/553
Supply Voltage 24 V dc
4 in stock for FREE next working day delivery
3 available from Europe for delivery within 1 working day(s)
Price Each
£ 18.20
(exc. VAT)
£ 21.84
(inc. VAT)
Units
Per unit
1 - 4
£18.20
5 - 9
£17.69
10 +
£17.22
Related Products
Direct acting brass bodied 2 port process solenoid ...
Description:
Direct acting brass bodied 2 port process solenoid valve for water. Flame resistant moulded coil Compact & lightweight Long life Temperature range: 1°C to 60°CMaximum pressure: 50 bar DIN plug connection.
The Type 5282 Burkert solenoid valve is specially ...
Description:
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of challenging applications. Less sensitive to dirty fluids and corrosion resistant ...
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain models will work best when the solenoid coil is mounted ...
Asco’s solenoid coil is predominantly used with solenoid ...
Description:
Asco’s solenoid coil is predominantly used with solenoid valves within pneumatic applications. Another common application is to start, stop or direct the flow of hydraulic fluid. It has been created and designed to withstand and operate in aggressive conditions and fluctuating temperatures. • This coil is ideal as a replacement ...