TE Connectivity Transparent Solder Sleeve 2.8 → 6mm

Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): MX
Product Details

CWT 38 braided cable terminals

These terminals allow earth tags to be created on shielded cables.
Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.
The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.
Quick and easy-to-use: simply place the terminal and the wire together and heat them using a hot air gun.
The clear sleeve facilitates connection quality control.
These terminals are available with (W1) or without pre-installed earth wire. The 22 AWG multistrand wire is white.

//media.rs-online.com/t_line/LF180828-10.gif
Specifications
Attribute Value
Minimum Cable Diameter 2.8mm
Maximum Cable Diameter 6mm
Sleeve Length 42mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Colour Transparent
Available to back order for despatch 08/06/2020
Price Each (In a Pack of 10)
£ 0.509
(exc. VAT)
£ 0.611
(inc. VAT)
Units
Per unit
Per Pack*
10 - 140
£0.509
£5.09
150 - 490
£0.484
£4.84
500 +
£0.459
£4.59
*price indicative
Related Products
The Solder Sleeve introduction kit contains various solder ...
Description:
The Solder Sleeve introduction kit contains various solder sleeves suitable for terminating a wide range of cable and wire constructions from 0.9mm to 15.1mm. Solder Sleeves provide insulated, environmentally sealed; strain-relieved soldered connections Temperature range -55°C to +125°CTerminate bare or tin plated conductors Supplied in a storage case with locking ...
A one piece soldering system for jointing signal ...
Description:
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is ...
Each terminator consists of heatshrinkable sleeve containing prefluxed ...
Description:
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several ...
Transparent Insulation Sleeve Provides Encapsulation, Inspectability, Strain Relief ...
Description:
Transparent Insulation Sleeve Provides Encapsulation, Inspectability, Strain Relief and Insulation Heat shrinkable, radiation cross linked modified polyolefin Thermally stabilized thermoplastic Applications: Designed to splice tin plated or bare copper stranded wires.