ADAFRUIT INDUSTRIES 1525 Solar Charger, Output:6 V @ 930 mA

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit 5.6W 6V Solar Panel

This 5.6 Watt solar panel is waterproof, scratch resistant, and UV resistant. Built using an aluminium/plastic composite substrate, they are both strong and lightweight and can easily stand up to typical outdoor use. 4 plastic mounting screws provide an easy way to keep your panel secured.

Length: 220 mm / 8.7"
Width: 175 mm / 6.9"
Cell type: Monocrystaline
Cell efficiency: 17%+
Thickness (without screws): 5 mm / 0.2"
Thickness (with screws): 10 mm / 0.4"
Wire Length: 260 mm / 10.2"
Connector Size: outside diameter (OD) 3.5 mm and inside diameter (ID) 1.1 mm
Weight: 225 g

Solar Panels and Chargers

Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries.
Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity.

How Much power?

The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 depending on the time of year, angle and location. For example; an 80Watt solar panel produces a peak current of 4.55A.

Solar Installation

Solar panels are usually installed at a 55-65° angle for optimal wintertime performance. For a year round power supply solar panels can be combined with Wind chargers.
Solar panels can be connected in parallel to increase power and in series to increase voltage.
To complete the system deep cycle batteries, a voltage regulator and electrical cables are required to get up and running. A range of convenient mounting kits are available for pole or wall mounting.

Specifications
Attribute Value
Model Number 1525
Power Rating 5.6W
Output Voltage 6 V @ 930 mA
Dimensions 220 x 175 x 10mm
Weight 225g
26 In stock for FREE next working day delivery
Price Each
£ 49.56
(exc. VAT)
£ 59.47
(inc. VAT)
Units
Per unit
1 +
£49.56
Related Products
The Friwo battery charger is a 3 cell ...
Description:
The Friwo battery charger is a 3 cell 2500mA Li-ion charger. It has an output voltage rating of 12.6V and efficiency is 75% at full load. This charger has a universal output plug system. • Constant voltage, current limited• Continuously short circuit proof• Exchangeable primary adapters• LED charge indication• Low ...
The Duracell Multi-charger is suitable for charging AA, ...
Description:
The Duracell Multi-charger is suitable for charging AA, AAA, C, D and 9v rechargeable NiMH batteries. The charger has a LED indicator that lights up red for charging and green to shows that charging is complete. Amber LED for AA, AAA, C, D,9VInput:100-240V AC, 50/60 Hz, 8WUK PlugClass 2, Power ...
Duracell’s 45 minute charger is a modern and ...
Description:
Duracell’s 45 minute charger is a modern and sleek design with 2 AA batteries ready in 45 minutes*Two charging channels allows 2 or 4 cells to be charged in combined clots (labelled)An LED status indicator shows the state of charge:-Red - ChargingGreen - Complete. Class 2, Integrated Power SupplyUK PlugTwo ...
Duracell’s CEF15 offers best in class performance with ...
Description:
Duracell’s CEF15 offers best in class performance with 4 AA/AAA cells ready in 15 minutes*. An LED status indicator shows the state of charge. Four independent channels for any combination of AA and AAA cells- Charger automatically detects cellUK PlugClass 2, Power SupplySingle cell charging capabilityEnsures a full charge regardless ...