Rittal TS IT 42U Server Cabinet 1998 x 1224 x 597mm

  • RS Stock No. 826-2760
  • Mfr. Part No. 5510110
  • Brand Rittal
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Rittal TS IT Cabinets

Fast, tool-free assembly of both rack and accessory components with snap-in technologyHigh load capacity up to 1,500 kgEfficient cable managementVented doors, surface area approx. 85% perforatedDivided rear doors from height 1,800 mm for optimised space utilisationMultifunctional roofExtensive range of accessories

The TS IT cabinets from Rittal are an intelligent modular rack system with a comprehensive range of accessories that have been designed to enable fast and tool-free assembly by a single person. Side panels are divided which allows the upper section to be located before simply slotting the lower section into place, without the need for screws. Simularily, accessories such as slide rails, component shelves and telescopic slides easily clip into the rear mounting angles and are secured at the front. If the 19in. levels need to be adjusted, then simply loosen the quick-release fastening, to slide and lock the mounting angles to the required depth. Offset positioning permits asymmetrical interior installations and the simple realisation of alternative mounting widths.

The intelligent cable management system of the TS IT cabinets allow patch cables to be shunted with ease using a simple shunting ring or a cable duct for targeted cable routing to a specific height unit. The interior rail system enables rear cable clamping and strain relief for the building cabling using nylon loops, clips or cable ties.The doors have individual locking variants, 180° hinges, comfortable handles and open ventilation - accounting for 85% of the perforated area. The multifunctional roof incorporates brush strips over the whole enclosure depth to enable cable entry down the sides and cable clamping facilities directly behind the brush strips. The TS IT cabinets even have a cut-out integrated for the mounting of a fan module for active and passive climate control.The TS IT cabinets can satisfy practically all expectations when it comes to modular, flexible network and server rack requirements.

Rittal TS IT Server Cabinet

TS IT, vented, for room climate control 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles for a load capacity of up to 1,500 kg, available in a range of size variants. DK Network/server enclosure TS IT, with 19" mounting angles, WHD: 600x2000x1200 mm, 42 U, Aluminium sheet steel door at the front, vented, Sheet steel door at the rear, vented, vertically divided.

Attribute Value
Rack Units 42U
Type Floor Standing
External Height 1998.5 mm
External Width 597 mm
External Depth 1224mm
External Dimensions 1998 x 1224 x 597mm
Series TS IT
Colour Grey
External Case Material Steel
Available to back order for despatch 24/03/2020
Price Each
£ 913.49
(exc. VAT)
£ 1,096.19
(inc. VAT)
Per unit
1 +
Related Products
The standard for enclosure manufacturing in high-grade stainless ...
The standard for enclosure manufacturing in high-grade stainless steel 1.4301 (AISI 304): Enclosure frame with one or two front doors, rear panel, mounting plate, roof plate, divided gland plates. Perfectly suited to efficient enclosure interior installation.
Removable top cover6, 7, 9U cases have a ...
Removable top cover6, 7, 9U cases have a different side panel construction to accommodate heavier equipment Shell handles can be replaced by folding handles, 50kg capacity (6, 7, 9U only)Folding feet can be fitted instead of standard anti-skid feet anthracite grey (RAL7016)Front/rear frames and side panels anthracite grey (RAL7016), cover ...
From Schroff the NOVASTAR range are slim, mobile ...
From Schroff the NOVASTAR range are slim, mobile server cabinets that are designed to house 19 inch servers and racks. These server cabinets are constructed from a lightweight but strong aluminium. NOVASTAR rack cabinets can be used without a door to give you unhindered access to the front of the ...
The versatile Interscale M standard series is an ...
The versatile Interscale M standard series is an electronics case designed for 19in. and desktop applications (can be DIN rail mounted with the aid of an accessory clip). The case is available in 40 different sizes, 21 with solid side panels and 19 with perforated panels on both sides. The ...