Sensirion Mounting Adapter for use with SDP800/SDP600 Pressure Sensors

  • RS Stock No. 123-7144
  • Mfr. Part No. SDP600/800 series cap
  • Brand Sensirion
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SPD6xx series Low-cost Differential Pressure Sensors

The Sensirion SDP600 series of digital differential pressure sensors offer superb performance and are targeted at low-cost high-volume applications. These sensors are for use with air or other non-aggressive gases and deliver accurate and stable results even at very low differential pressures.
The SDP600 series operates from a supply voltage of 3.3V and features a digital 2-wire interface enabling easy direct connection to a suitable microprocessor. The measurement signal is internally linearized and temperature compensated.
The SDP6x1 devices (123-7139 & 123-7142) are optimized for measure mass flow or standard volume flow measurements in a bypass configuration.
The SDP6x6 devices (123-7140 & 123-7143) include a power saving feature which effectively puts the sensors into standby mode between measurements.

Pressure Sensors, Sensirion

Specifications
Attribute Value
Accessory Type Connecting Cap
For Use With SDP800/SDP600 Pressure Sensors
Available to back order for despatch 22/05/2020
Price Each (In a Bag of 10)
£ 1.137
(exc. VAT)
£ 1.364
(inc. VAT)
Units
Per unit
Per Bag*
10 - 40
£1.137
£11.37
50 - 90
£0.833
£8.33
100 - 240
£0.755
£7.55
250 - 490
£0.717
£7.17
500 +
£0.666
£6.66
*price indicative
Related Products
To convert either of the NT21 serial ports ...
Description:
To convert either of the NT21 serial ports to RS422, this two or four wire connection adaptor plugs directly into the RS232 port. There are screw terminals for the RS422 connections and on board switches allow the selection of two or four wire and terminator setting for the physical ends ...
Teledyne Le Croy Pro Bus probe adapter TPA10 ...
Description:
Teledyne Le Croy Pro Bus probe adapter TPA10 enables any existing Tek Probe probes to be used on Teledyne Le Croy oscilloscopes, allowing for easy and affordable access to the latest in oscilloscope technology. Users simply plug the TPA10 into any Pro Bus-equipped Teledyne Le Croy oscilloscope and attach a ...
Vacuum and positive pressure models available, with PNP, ...
Description:
Vacuum and positive pressure models available, with PNP, Analogue voltage or Analogue current outputs Two colour digital display for fast "abnormal condition" identification High precision resolution, typically 1/1000User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber ...
Fixing adapter from Smart Wire RMQ connections range ...
Description:
Fixing adapter from Smart Wire RMQ connections range for use with the RMQ Titan M22 range of control circuit devices. Smart Wire-DT is a simple communication system to connect switchgear systems it reduces the wiring requirement needed and the expense compared to other systems. Connection via standard fieldbus systems (e.g ...