Weather Click board BME280

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Weather click mikroBUS™

The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. The Weather click add-on board features the Bosch BME280 sensor providing accurate measurement of humidity, barometric pressure and temperature.

Temperature measurement range: -40 to +85°C
Humidity measurement range: 0 to 100% RH
Barometric pressure measurement range: 300 to 1100hPa
Three operating modes: Sleep, Forced and Normal
Sleep mode: no operation, all registers accessible, lowest power, selected after startup
Forced mode: perform one measurement, store results and return to sleep mode
Normal mode: continuous cycling of measurements and inactive periods
Communication: serial I²C, SPI
Serial interface selected by jumper link
Two I²C addresses available, selected by jumper link
Supported by all MikroElektronika compilers
Power supply: +3.3Vdc
Dimensions: 28.6 x 25.4 x 3.3mm
Applications: Home automation, fitness monitors, weather forecasting, vertical movement detection, remote sensing for the Internet of Things (IoT)

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Sensor Boards

MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!
Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your designs. Some boards also act as extensions for development platforms such as the Beaglebone, Arduino Uno and Raspberry Pi.

Specifications
Attribute Value
Sensor Technology Temperature Sensor
Kit Classification MikroBus Click Board
38 In stock for FREE next working day delivery
Price Each
£ 17.67
(exc. VAT)
£ 21.20
(inc. VAT)
Units
Per unit
1 - 4
£17.67
5 +
£16.96
Related Products
RTC3 click is a mikroBUS add-on board for ...
Description:
RTC3 click is a mikroBUS add-on board for providing Real-Time Clock (RTC) and Calendar information with programmable alarms output. It features the Texas Instruments bq32000 Real-Time Clock. Current Time: Seconds, Minutes, Hours, Century, Days, Day of Week, Months and Years. Automatic Switchover to Back up Supply. Trickle Charger to Back ...
UNIQUE ID click is a mikroBUS add-on board ...
Description:
UNIQUE ID click is a mikroBUS add-on board for providing a unique electronic registration number. It features the Maxim DS2401, Silicon Serial Number. It consists of a unique, factory-lasered 64-bit ROM with a 48-bit Serial Number, an 8-bit CRC (Cyclic Redundancy Check), and an 8-bit Family Code for communications requirements. ...
SRAM click is a mikroBUS add-on board for ...
Description:
SRAM click is a mikroBUS add-on board for adding SRAM (Static Random Access Memory). It features the Microchip 23LC1024, a 1MBit Serial SRAM with SPI Bus. 1 MBit, organised in 128 K x 8 bit of SRAM memory in 32-byte pages. Supports SDI (Serial Dual Interface) and SQI (Serial Quad ...
The EEPROM2 click is an add-on board for ...
Description:
The EEPROM2 click is an add-on board for storing initialisation and configuration data of your application. The STMicroelectronics M95M02 device is a 2Mbit Electrically Erasable PROgrammable Memory (EEPROM) organised as 262144 x 8 bits of memory, accessed through the SPI bus. EEPROM: 2M bit (256 KBytes)Page size: 256 Bytes. Byte ...