Seeed Studio 101020088, Grove-Multichannel Gas Sensor for MiCS-6814 for Arduino

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Grove – Multichannel Gas sensor is a environment detecting sensor with a built in MiCS-6814 which can detect many unhealthy gases. 3 gases can be measured simultaneously due to its three channels, so it can help you to monitor the concentration of more than one gas.This sensor belongs to the Grove system, and you can plug it onto the Base shield and work with Arduino directly without any jumper wires. The interface is I2C, so plug it onto the I2C port of Base shield, then you can start to work on it.

Three fully independent sensing elements on one package
Built with ATmega168PA
I2C interface with programmable address
Heating power can be shut down for low power
Detectable gases:Carbon monoxide (CO) , Nitrogen dioxide (NO2) , Hydrogen (H2) , Ammonia (NH3) , Methane (CH4) , etc.

Specifications
Attribute Value
Featured Device MiCS-6814
For Use With Arduino
Kit Name Grove-Multichannel Gas Sensor
Available to back order for despatch 13/07/2020
Price Each
£ 30.10
(exc. VAT)
£ 36.12
(inc. VAT)
Units
Per unit
1 - 4
£30.10
5 +
£29.06
Related Products
The Seeed studio single-channel, grove-line finder v1.1 is ...
Description:
The Seeed studio single-channel, grove-line finder v1.1 is a comprehensive kit designed with optical sensor development tools. This kit is integrated with IR limiting LED, sensitive phototransistor, comparator LMV358 and photo reflective diode RS-06WD. It has a 4-pin buckled grove interface. When the phototransistor detects the reflected infrared light from ...
The Seeed studio single-channel, grove air quality sensor ...
Description:
The Seeed studio single-channel, grove air quality sensor v1.3 kit is for indoor air quality testing. This kit has an integrated senor Winsen MP503. It mainly detects gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. • Cost effective• Durable in nature• Grove interface• High ...
The Re Speaker Mic Array v2.0 is a ...
Description:
The Re Speaker Mic Array v2.0 is a hardware-based solution for creating or adding voice-interface to your projects. The board is a far-field microphone array device capable of detecting voices up to 5m away even with the presence of background noise. The on-board hardware-enabled algorithms are powered by the XMOS ...
The potentiometer twig produces analog output between 0 ...
Description:
The potentiometer twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be ...