Digilent 410-308 Programming Module for use with FPGA Devices

  • RS Stock No. 134-6473
  • Mfr. Part No. 410-308
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-SMT2 SMT Programming Module

The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.

Features

• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm

RS Product Codes

134-6434 JTAG-SMT2 SMT Module
134-6473 JTAG-SMT2-NC SMT Module (without USB connector)

Note

This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Accessory Type Programming Module
For Use With FPGA Devices
162 In stock for FREE next working day delivery
Price Each
£ 39.33
(exc. VAT)
£ 47.20
(inc. VAT)
Units
Per unit
1 +
£39.33
Related Products
The Synergy AudioCODEC module converts stereo analogue audio ...
Description:
The Synergy AudioCODEC module converts stereo analogue audio signals to and from a single digital signal utilizing the I2S protocol. It is designed to work with the mbed LPC1768 microcontroller module. The AudioCODEC module is packaged in a convenient form factor for rapid prototyping using the popular TLV320AIC23B audio CODEC ...
This quad-bearing gimbal joystick provides a two-axis resistive ...
Description:
This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as position, velocity and tilt. It can be interfaced to any microcontroller with at least two analogue input channels. 5 kΩ linear-taper potentiometer on each axisSmooth ball-bearing action on both axesSelectable spring return-to-center on vertical axisSelectable detents ...
This reference design from Microchip utilises a UCS1002 ...
Description:
This reference design from Microchip utilises a UCS1002 Programmable Port Power Controller IC in combination with a PIC16F1503 Microcontroller to provide a fully functional Universal Serial Bus (USB) charger that is compatible with a wide variety of portable devices.The UCS1002 Programmable Port Power Controller is capable of delivering up to ...
J-Link PLUS is a JTAG programming and debug ...
Description:
J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in ...