Digilent 410-249 Programmer Adapter for use with Xilinx FPGAs

  • RS Stock No. 134-6458
  • Mfr. Part No. 410-249
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS2 FPGA Programming Cable

The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC.

Features

• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB
• JTAG connector: 0.1in 6-pin
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK

Supported Target Devices

• Xilinx FPGAs
• Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs
• Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

Xilinx JTAG 2 x 7-pin 2mm connector adapter, USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Accessory Type Programmer Adapter
For Use With Xilinx FPGAs
53 In stock for FREE next working day delivery
Price Each
£ 48.15
(exc. VAT)
£ 57.78
(inc. VAT)
Units
Per unit
1 +
£48.15
Related Products
Description:
4 x USB A + 1 x USB Type-CPlug in or desktop switching adaptor Double insulated Small low profile package Overload, short circuit protection Lowest standby power consumption Single board computers Wireless communications PeripheralsNetworkingPortable equipment Tablets / Smartphones Telecom.
A Schroff test adaptor for DIN 41612 connectors, ...
Description:
A Schroff test adaptor for DIN 41612 connectors, type C. 2 different measuring fields: current and voltage measurement (U/I pluggable test bridges; voltage measurement (V) soldered test bridges Connector type C64: header with pin diameter 0.6 mm for wire wrap Outer pin rows (C64: pin 1a, c and pin 32a, ...
Replacing multiple tools for testing and troubleshooting audio, ...
Description:
Replacing multiple tools for testing and troubleshooting audio, data and coax wiring, the Cable IQ is ideal for residential cabling systems. The wiremap adapter doubles as a protective cap, whilst the protective boot makes this cable tester sleek and durable. A large graphical display gives crystal clear view results and ...
ST's ready-to-use MEMS motherboard (STEVAL-MKI109V3) development platform lets ...
Description:
ST's ready-to-use MEMS motherboard (STEVAL-MKI109V3) development platform lets engineers monitor the behavior of ST MEMS sensors, which can help accelerate time to market and maximize the performance of new product designs. This board is compatible with ST MEMS adapter boards and supports I2C and SPI data modes for very high ...