Digilent 410-251 Programming Module for use with FPGA Devices

  • RS Stock No. 134-6434
  • Mfr. Part No. 410-251
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-SMT2 SMT Programming Module

The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.

Features

• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm

RS Product Codes

134-6434 JTAG-SMT2 SMT Module
134-6473 JTAG-SMT2-NC SMT Module (without USB connector)

Note

This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Accessory Type Programming Module
For Use With FPGA Devices
93 In stock for FREE next working day delivery
Price Each
£ 41.22
(exc. VAT)
£ 49.46
(inc. VAT)
Units
Per unit
1 +
£41.22
Related Products
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance ...
Description:
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. Typical applications include proximity zone detection, people detection, robotics ranging ...
The VM800P is a development module, designed to ...
Description:
The VM800P is a development module, designed to provide engineers with everything necessary to create quality Human Machine Interface (HMI) solutions with display, audio and touch functionality.This completely Arduino-compatible module features an FT800 chip for three in one operation (display, audio and touch) and its FT232R USB UART interface IC ...
This quad-bearing gimbal joystick provides a two-axis resistive ...
Description:
This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as position, velocity and tilt. It can be interfaced to any microcontroller with at least two analogue input channels. 5 kΩ linear-taper potentiometer on each axisSmooth ball-bearing action on both axesSelectable spring return-to-center on vertical axisSelectable detents ...
Designed in conjunction with Grand Idea Studio, the ...
Description:
Designed in conjunction with Grand Idea Studio, the Emic 2 Text-to-Speech Module is a multi-language voice synthesizer that converts a stream of digital text into natural sounding speech. Its simple command-based interface makes it easy to integrate into any embedded system. High-quality speech synthesis for English and Spanish languagesNine pre-defined ...