SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

  • RS Stock No. 131-1336
  • Mfr. Part No. 8.07.01 SWD Isolator
  • Brand SEGGER
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Specifications
Attribute Value
Accessory Type Adapter
For Use With J-Link Probes
Available to back order for despatch 23/01/2020
Price Each
£ 211.20
(exc. VAT)
£ 253.44
(inc. VAT)
Units
Per unit
1 +
£211.20
Related Products
The DS9490 series is a uniquely designed USB ...
Description:
The DS9490 series is a uniquely designed USB bridge and holder for a single F5-size i Button, with a high-speed 12 Mbps USB Interface, which supports standard and overdrive 1-wire communications. Slew-Rate-Controlled 1-wire timing and active pullup for improved 1-wire network performance. The DS9490R has a RJ11 interface for standard ...
The DFRduino Beginner Kit from DFRobot is an ...
Description:
The DFRduino Beginner Kit from DFRobot is an ideal kit to learn about Arduino and electronics. The Starter Kit includes a DFRduino UNO R3 and guides the user through the world of the sensors and microcontrollers with a carefully designed project. The DFRduino UNO R3 is compatible with the Arduino ...
To help accelerate the development of your project, ...
Description:
To help accelerate the development of your project, this expansion board provides easy access the pins on your Pycom board. Together with the pinouts, there is a micro-USB connector for power and serial communications, a Lithium Polymer battery charger, reverse battery protection, micro-SD card slot, a button, and a user ...
The JTAG-HS2 programming cable allows high-speed programming of ...
Description:
The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC. • Compatible with all Xilinx tools• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)• On-board ADP123AUJZ 300mA voltage regulator• Separate Vref drives JTAG/SPI signal voltages• Vref can be any voltage between ...