MODMYPI LTD MMP-0061 for use with Raspberry Pi

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

PIco Fan Kit for Raspberry Pi, ModMyPi

PIco FAN Kit is an Advanced Active Cooling System for the Raspberry Pi and is easy to install by using the UPS Plco(Uninterruptible Power Supply and I2C HAT). The kit with the use of UPS Plco supervising circuits regulates any overheating of the Raspberry Pi board. Also has an embedded temperature measurement system which monitors and regulates the temperature by switching the fan on and off.

Uninterruptible Power Supply and I2C HAT are available to purchase RS 1270208

Raspberry Pi is not included and can be purchased separately (Raspberry Pi 3 - RS 8968660 and previous models)

Features

Powered from the J8 (P1) connector of the Raspberry Pi® via UPS PIco
PWM FAN speed regulation
1 RED LED-based information system (Light Red - hot, Light Red – cold)
Full control over the system via I2C interface (The PIco Interface)

Kit Contents

Micro Fan with cable
Set of 4 tree clips required for PIco FAN mounting UPS PIco PCB
Set of 4 rubber washers required for the PIco FAN mounting UPS PIco PCB
TO-92 temperature sensor
2 mm PCB connector for the FAN

Specifications
Attribute Value
For Use With Raspberry Pi
28 In stock for FREE next working day delivery
Price Each
£ 7.49
(exc. VAT)
£ 8.99
(inc. VAT)
Units
Per unit
1 +
£7.49
Related Products
This kit combines the Raspberry Pi 3 with ...
Description:
This kit combines the Raspberry Pi 3 with the pi-topPULSE, plus the accessories you need to get up and running. Learn, play or create fun projects with the Raspberry Pi and this add-on board. Add your choice of input device such as a mouse, keyboard or touchscreen, plug in the ...
The RSP2pro is a powerful, wideband SDR receiver. ...
Description:
The RSP2pro is a powerful, wideband SDR receiver. It is a fully assembled SDR module, covering all frequencies from 1 kHz to 2 GHz, with a huge 10 MHz of spectrum bandwidth visibility and capture capability. Housed in a heavy steel case, the RSP2pro is rugged and provides the ultimate ...
J-Link PRO is a JTAG/SWD programming and debug ...
Description:
J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or ...
The J-Link JTAG Isolator can be connected between ...
Description:
The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher ...