• RS Stock No. 192-5912
  • Mfr. Part No. DELA.1051.150
  • Brand Facom
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Facom Flexible Stainless Steel Rulers

These stainless steel rulers from Facom are ideal for using across a wide field of industries, by professionals and engineers. They are ideal in assisting you in measuring, drawing, cutting or scoring straight lines on materials.

A steel ruler or rule is a type of straightedge measuring tool that measures actual sizes in either imperial or metric measurements and for drawing straight lines.

Facom DELA 1051 series of flexible stainless steel rulers are etched on both sides: one side in mm and the other side in 1/2 mm and are available in the following lengths:
300-6613 - DELA.1051.150 Metric ruler, length 150mm
300-6629 - DELA.1051.200 Metric ruler, length 200mm
300-6641 - DELA.1051.300 Metric ruler, length 300mm

Features and Benefits:

Engraved on both sides
Lines and figures are etched and appear in black due to oxidation
Anti-glare finish - for clear visibility of the scale
High-quality class II rulers
Available in calibrated version

Typical Applications

Rulers are used to measure the length of an object or its edge precisely and as a guide for drawing or scoring straight lines. Rulers are used in schools, at home and in a wide range of occupations and fields of study including geometry, printing, technical drawing, building and engineering.

What are Rulers made from?
Rulers are made from durable materials like wood, plastic or metal. These materials are hard wearing, and usually shatter resistant and scratch proof for durability. This Facom ruler is made from stainless steel.

Care advise
Steel rules are precision measuring instruments and should be easy to maintain. They should not be used as a scraper, screwdriver or pry bar and be careful not to bang the ruler around. Inspect your steel rule periodically. Be sure that it is not bent or dented. Check that the corners are square and sharp. Be sure there are no burrs anywhere on the steel rule. A good quality steel rule should last a long time, as long as it's looked after.

870 In stock for delivery within 2 working days
Price Each
£ 36.41
(exc. VAT)
£ 43.69
(inc. VAT)
Per unit
1 +
Not available for guaranteed pre 9am/10am delivery
Related Products
This stainless steel depth gauge has a spring ...
This stainless steel depth gauge has a spring tension nut for easy depth measurements, with graduations in mm & inches. You can slide the ruler down, tighten the locknut and take the reading. It can also be used to find 3 angles: 15°, 30° & 45°. Stainless steel rule mm ...
Heads are manufactured from fully hardened steel Base ...
Heads are manufactured from fully hardened steel Base and Top surface are ground for use as a datum face Base Datum Face: 2 1/2in x 1/8in Top Datum Face: 1in x 1/8in Bevelled surface of datum face allows easy reading of rule Rule clamped by spring loaded finger clamp Rule ...
Innovative, Swiss-made 2 m folding rule with additional ...
Innovative, Swiss-made 2 m folding rule with additional functions Fibreglass-reinforced polyamide, scratchproof, shatter-proof, weatherproof and washable Interior and depth gauge using extendible depth extension Hinge with 90° angle measurement scale for measuring angles Pushbutton locking of depth gauge on third rule for angle hinge function for woodwork and tiling.
Metre rule made from white beech with closely ...
Metre rule made from white beech with closely spaced 3 mm-thick arms Embedded hinges with steel springs and covered rivets White/yellow, with water-, wear- and solvent-resistant protective varnish surface finish Red heads, black scale divisions, red tens digits, cm/mm divisions on both edges Accuracy class III.